
39 minutes of painting, sped up.
Journal
First, middle and last entries.
- Day 1, 09:00Subject: an estuary at low tide just after sunset. Low horizon at y~400. Sky warm glow low-left-of-centre (x~380), cooling to blue-grey above; a long band of dark stratus crossing it. Right: a spit of land with a clump of trees, dark against the glow. Foreground: wet mud banks (warm umber) with channels of bright water reflecting the glow; a small boat lying over on the mud at…
- Day 17, 16:18Day 17. Channel repainted in one wet layer, narrowing into the distance; mud given a cool dark glaze toward the foreground. Banks read flatter but the channel edges are still clean ruled lines and the far mud is one slab. Now: thin bright horizontal wet-sheen lines across the far mud (alternating mud and shine, closer together with distance), a wet lip along the channel edges,…
- Day 147, 13:54Day 147. All touch-dry after four months. A light mastic varnish (0.3 coats): warms the slate of the upper sky toward grey, pulls the glow and the mud together. Finished. Title: "Low Water, After Sunset".
Read all 14 entries
Times are on the painting's own clock, which runs only while the painter paints or waits for paint to dry.
- Day 1, 09:00Subject: an estuary at low tide just after sunset. Low horizon at y~400. Sky warm glow low-left-of-centre (x~380), cooling to blue-grey above; a long band of dark stratus crossing it. Right: a spit of land with a clump of trees, dark against the glow. Foreground: wet mud banks (warm umber) with channels of bright water reflecting the glow; a small boat lying over on the mud at left; a line of stakes receding at right. Ground: lead white knifed, then a thin warm ochre/umber imprimatura. Plan: pencil drawing, thin lay-in of sky and water, dark land and mud, rest, then second layer for clouds, glow, reflections; details last; varnish.
- Day 1, 15:50Day 1 afternoon. Sky laid in four bands (cool slate top, violet-grey, warm pale, yellow glow at horizon) and blended twice across; reads as a soft gradient. Water laid as the sky inverted, blended horizontally. Mud banks laid in with a warm umber — too flat and too domed: they read as hills, not flat banks in perspective. Will reshape their tops later by pulling water over them and add sheen. Next: far shore and the spit with its tree clump, dark against the glow.
- Day 3, 17:41Day 3. Trees repainted as rounded crowns (roughened union of ellipses): reads as foliage now, though some grey lifted patches remain in the lower mass. Mistake: laid a vertical-stroke reflection under the spit and blended it with a rect mask; the badger smeared it into a hard-edged grey rectangle over the dry water. Will let it dry and repaint the glow water over it, then do the reflection with short horizontal strokes and no big blend. Meanwhile clouds on the dry sky.
- Day 6, 20:39Day 6 evening. Repainted the whole sky over the dry lay-in with a stronger gradient, set the clouds wet-in-wet from stretched-noise masks, and blended the whole field twice at crossing angles: the sausage clouds dissolved into soft streaks, much more like air. Discovered the tree mask had a gap between crowns and the base strip; the sky paint now shows under the canopy as an arch of light. Will keep the idea (light between trunks) but break it with trunks and low foliage. Repainted the glow water across, covering the grey block, and laid the tree reflection wet-in-wet with horizontal strokes then one horizontal blend: soft, hazy, acceptable.
- Day 7, 00:27Day 7, night. Reworked the left mud bank with a near-dark / middle / pale-rim gradient and blended: it now reads as a smooth rounded boulder. The dome outline plus smooth modelling is the problem. Flat mud in perspective wants horizontal shelves, ragged near-horizontal edges, pools of sky in it. Plan once dry: paint water over the dome top to cut the edge into shelves, add sheen pools and ripple ridges; same for the right bank. Also a second pass over the trees for variety and to cover streaks.
- Day 9, 01:53Day 9. Cut the mud banks down to near-horizontal shelves by painting water over their domed tops; added sky pools and a textured pass (flat brush dabs of dark, green and pale mud) that looked like cobbles until one horizontal blend fused it into streaky mud. Pools still look pasted on. Whole view: sky good, but the lower half is too pale and too even in value; the channel margins have pale strips that make the banks look like cliffs. Plan: darken the foreground water toward the slate of the upper sky it reflects, deepen the near mud with a glaze, ripple lines on the middle water, restore the far shore line, then boat, stakes, second pass on the trees.
- Day 11, 03:23Day 11. Realised why the banks read as cliffs/mesas: the channel between them WIDENS toward the horizon, so its edges diverge instead of converging in perspective. Fix: extend both banks so the channel narrows into the distance (edges converging), keep their far edges horizontal. Also the smooth blended gradient on the mud makes rounded forms; horizontal sheen streaks help flatness but my uniform ones look like stone slabs.
- Day 17, 16:18Day 17. Channel repainted in one wet layer, narrowing into the distance; mud given a cool dark glaze toward the foreground. Banks read flatter but the channel edges are still clean ruled lines and the far mud is one slab. Now: thin bright horizontal wet-sheen lines across the far mud (alternating mud and shine, closer together with distance), a wet lip along the channel edges, and dark bank reflections in the channel.
- Day 17, 17:23Day 17 evening. A scumble over the far mud went on as an opaque scalloped block; three horizontal blends of the whole bank fused it into a hazy recession, light far, dark near, with the fine crackle texture of the glaze still in the foreground. Far shore line restored along the horizon. Thin ripple strokes on the middle water (warm glints under the glow, violet elsewhere) make it read as water. Next: boat on the left bank, stakes along the channel, bank reflections.
- Day 18, 23:53Day 19. Boat painted on the left bank (dark slate hull, warm interior, mast and stay, contact shadow): reads as a boat, a little toy-like. Line of six stakes along the right channel edge with wavering reflections. Edge treatment along the channel (dark reflection band + pale lip) looked piped; a narrow badger blend softened it into a wet margin but also smeared two stakes and left a lattice patch near 720-840,575. Repair after drying.
- Day 21, 12:54Day 21. Second pass on the trees: filled most of the light arch under the canopy leaving four small openings with trunks, stippled a warmer olive along the upper-left crown edges where the glow would catch, and integrated the odd oval crown with touches round its rim. Restated the six stakes with flat lit tops and wavering reflections. Tried lit undersides on the mid cloud: thin warm dashes looked like morse; a soft badger took most of them away again - the sky is better quiet.
- Day 23, 13:25Day 23. Darkened the boat hull and interior with glazes, gunwale highlight, three distant birds. Closed most openings under the trees (they had become a row of arches, like a viaduct). Soft glow core in the sky above the horizon at left-centre. Weed clumps and stones on the mud in perspective (bigger nearer); they read as olive-brown wrack. Value check (squint): the range is too narrow, mud barely darker than water. Next: a stronger dark glaze over the near mud so the pale channel leads in and the foreground frames the light.
- Day 27, 13:52Day 27. Horizontal ripples in the channel (softened with a narrow badger so the glints sit in the water rather than on it). Strengthened the trees reflection with broken dark horizontal strokes right under the waterline, then blended within a mask shaped like the reflection itself (not a rectangle, the mistake of day 3): it now hangs from the spit and fades down, mottled like slightly moving water. Squinting, the picture holds: dark tree mass and dark near mud frame the pale glow and the channel that leads into it. I judge it complete. Letting it dry fully, then a light varnish.
- Day 147, 13:54Day 147. All touch-dry after four months. A light mastic varnish (0.3 coats): warms the slate of the upper sky toward grey, pulls the glow and the mud together. Finished. Title: "Low Water, After Sunset".
What it was given
All 7 items, in order
Long documents open on their own pages.
Systemthe default prompt of pi, the coding-[local account redacted] program the painter ran in · 97 lines
This is pi's default coding-assistant prompt (the painter ran as a general coding [local account redacted]).
Sent first: pi's Anthropic request template
You are Claude Code, Anthropic's official CLI for Claude.
Opening · 1 line
You are an expert coding assistant operating inside pi, a coding [local account redacted] harness. You help users by reading files, executing commands, editing code, and writing new files.
Tools, in brief · 16 lines
- bash: Execute bash commands (ls, grep, find, etc.)
- todo: Manage a task list to track multi-step progress
- bg_start: Start a genuinely asynchronous task for concurrent work or later interaction
- bg_wait: Wait for finite completion and return the latest pipe log line
- bg_status: Inspect background task status with the latest pipe log line
- bg_logs: Read full task output when a latest-line summary is insufficient
- bg_send: Send a compact text/key input string or an OS signal to a background task
- bg_kill: Terminate an unresponsive background task
- subagent: Spawn a sub-[local account redacted] in a dedicated terminal herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT call subagents_list or any other tool to 'check' status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate, assume, or summarize results after calling this tool. After spawning, either end your turn immediately, or work on other independent tasks (including spawning more subagents in parallel). The harness will wake you with the result when it is ready.
- subagent_interrupt: Send Escape to the active turn of a currently running Pi-backed subagent. The child pane, session, watcher, and running entry remain alive; this returns only a local acknowledgement and does not emit a subagent_result solely because of this request.
- subagents_list: List all available subagent definitions. Scans project-local .pi/agents/ and global [local path redacted] Project-local agents override global ones with the same name.
- subagent_resume: Resume a previous sub-[local account redacted] session in a new herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the resumed sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT poll for status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate or assume results. After resuming, either end your turn or work on other independent tasks; the harness will wake you when the result is ready. Use when a sub-[local account redacted] was cancelled or needs follow-up work.
In addition to the tools above, you may have access to other custom tools depending on the project.
Rules · 48 lines
- Use bash for file operations like ls, rg, find
- You can inspect PI_* environment variables for current model and session details.
- Use
todofor complex work with 3+ steps, when the user gives you a list of tasks, or immediately after receiving new instructions to capture requirements. Skip it for single trivial tasks and purely conversational requests. - When starting a task from the todo list, mark it in_progress BEFORE beginning work. Mark it completed IMMEDIATELY when done — never batch completions. Exactly one task in_progress at a time.
- Never mark a task completed if tests are failing, the implementation is partial, or you hit unresolved errors — keep it in_progress and create a new task for the blocker instead.
- Task status is a 4-state machine: pending → in_progress → completed, plus deleted as a tombstone. Pass activeForm (present-continuous label, e.g. 'researching existing tool') when marking in_progress.
- To change a task's status, call update with the task id and the target status, e.g. {"action":"update","id":3,"status":"completed"} or {"action":"update","id":3,"status":"in_progress","activeForm":"writing tests"}. status is the field that changes the task; an update without a mutable field (status or another) is rejected.
- Use blockedBy to express dependencies (A is blocked by B). On create, pass blockedBy as the initial set. On update, use addBlockedBy / removeBlockedBy (additive merge — do not resend the full array). Cycles are rejected.
- list hides tombstoned (deleted) tasks by default; pass includeDeleted:true to see them. Pass status to filter by a single status.
- Subject must be short and imperative (e.g. 'Research existing tool'); description is for long-form detail. activeForm is a present-continuous label shown while in_progress.
- Use bg_start only when the user explicitly requests background execution, the process must remain available for later interaction (for example, a server, watcher, or TUI), or you will perform independent useful work concurrently while it runs.
- Do not use bg_start merely because a command may be slow. If background execution was not explicitly requested and you need its result before any independent work can proceed, use the bash tool with an appropriate timeout instead of bg_start → bg_wait → bg_logs.
- Give each bg_start task a unique name; names are compared case-insensitively across all currently retained tasks.
- Use the Environment returned by bg_start and later bg_* results as the task's immutable launch location; an SSH task stays on that target and cwd even if the active workspace changes.
- Set bg_start pty=true only for terminal-aware or interactive TUI programs; keep the default pipe mode for ordinary builds and servers.
- Once bg_start is justified, compose complete bg_* workflows in one assistant response. Every bg_* id accepts a task ID or unique name, and same-task calls execute strictly in source order, not in parallel. For example, emit bg_start(name="tests") → bg_wait(id="tests") → bg_logs(id="tests") together; for an existing task, emit bg_wait → bg_logs together. Different tasks execute in parallel, and bg_status without id is independent.
- A running bg_start task survives ordinary [local account redacted] runs but session reload or shutdown terminates it. A task finishing during a run is normally retained through that run; a task that was still running when the [local account redacted] settled and then finishes while idle is normally retained through the next run.
- Use bg_wait only for finite bg_start tasks whose completion is needed. bg_wait includes the latest pipe log line when available; place bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed. Do not poll either tool.
- Use bg_wait once when completion of an already-justified finite bg_start task is required; never create a bg_start task solely so you can wait on it.
- bg_wait returns completion status plus the latest pipe log line when available. Emit bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed; do not wait for the bg_wait result before emitting bg_logs.
- A bg_wait timeout leaves the task running and still returns the latest pipe log line; a following same-response bg_logs call reads fuller output retained at that point.
- Do not use bg_wait for persistent servers or watchers, and do not immediately wait again after a timeout unless the user asks you to keep waiting.
- Do not poll bg_status after bg_start; use bg_wait once when a finite task's final status is required.
- Use bg_status only for requested task metadata, recovering a missing task reference, or diagnosing task state.
- Use bg_status without id only when the task ID or name is unknown and a retained-task list is needed.
- bg_status includes the latest pipe log line when available; use bg_logs for full or multiline pipe output and for all PTY terminal output.
- Use bg_logs when you need more than the latest pipe log line returned by bg_wait or bg_status, or when you need any PTY terminal output.
- Use bg_logs with tail=N for recent output; omit stream to use the correct default for either pipe or PTY mode.
- Do not poll with bg_logs. When fuller finite output is needed, emit bg_wait followed by bg_logs in the same assistant response; source ordering makes bg_logs run after bg_wait.
- Provide exactly one of bg_send input or signal. bg_send input is exact text; wrap every terminal key in an angle-bracket token such as <C-d>, <A-f>, <Space>, or <Up>, and escape a literal '<' as <.
- Use bg_send input for terminal keys; use bg_send signal only when an OS process signal is explicitly intended.
- For a pipe task, bg_send input=<C-d> or input=<EOF> closes stdin.
- When bg_send is followed by waiting or output inspection, emit bg_send → bg_wait → bg_logs together in one assistant response so same-task source ordering avoids extra model rounds.
- For a disconnected adapter task, bg_send input is unavailable because the local transport is gone, but bg_send signal may remain usable for cleanup.
- Use bg_kill when a background task must be terminated.
- Use bg_kill with force=true to send SIGKILL immediately; otherwise bg_kill sends SIGTERM.
- bg_kill returns termination status only. When final output is needed, emit bg_kill followed by bg_logs in the same assistant response.
- Default to a bare spawn: write the task (and, if useful, systemPrompt, tools or skills) for the job at hand. Use a named [local account redacted] only when one listed below clearly fits.
- Omit model and thinking when invoking a named [local account redacted] so its configured defaults apply. Passing either field is an explicit one-off override and takes precedence over [local account redacted] frontmatter.
- For a bare spawn, omit model and thinking to inherit the parent runtime.
- When an intentional runtime override is necessary, prefer changing thinking before changing models: minimal/low for bounded mechanical work, medium for ordinary implementation or review, and high+ for architecture, concurrency, security, or hard diagnosis.
- When overriding a subagent model, use an exact authenticated provider/model-id from the live catalog below. Do not invent aliases or fuzzy names.
- Available named subagent catalog becomes available after session start.
- Authenticated subagent model catalog becomes available after session start.
- Be concise in your responses
- Show file paths clearly when working with files
Pointers to pi's documentation · 10 lines
Pi documentation (read only when the user asks about pi itself, its SDK, extensions, themes, skills, or TUI):
- Main documentation: [local path redacted]
- Additional docs: [local path redacted]
- Examples: [local path redacted] (extensions, custom tools, SDK)
- When reading pi docs or examples, resolve docs/... under Additional docs and examples/... under Examples, not the current working directory
- When asked about: extensions (docs/extensions.md, examples/extensions/), themes (docs/themes.md), skills (docs/skills.md), prompt templates (docs/prompt-templates.md), TUI components (docs/tui.md), keybindings (docs/keybindings.md), SDK integrations (docs/sdk.md), custom providers (docs/custom-provider.md), adding models (docs/models.md), pi packages (docs/packages.md), environment variables (docs/environment-variables.md)
- When working on pi topics, read the docs and examples, and follow .md cross-references before implementing
- Always read pi .md files completely and follow links to related docs (e.g., tui.md for TUI API details)
Addendum · 12 lines
Responsive communication
When the user requests work, begin with one or two short, specific sentences acknowledging the request and stating your next action before calling tools. Do not wait until the work is complete to speak. If the request can be answered immediately, answer directly instead of adding a separate acknowledgment.
When a new user message arrives during work, address it at your next opportunity before continuing. Respect the harness's existing steering, queuing and cancellation behavior; this instruction does not authorize interrupting or restarting running operations.
Keep updates conversational and useful. Avoid flattery, stock apologies, corporate jargon, repeated acknowledgments and generic wrap-ups. State intentions as intentions, not completed actions. Do not claim a result before checking it. Preserve the user's explicit formatting and style preferences.
This is a communication preference, not a reason to skip necessary reasoning, verification or safety checks.
Working folder · 3 lines
[local path redacted]
- ToolsTools it could call · 16 tools
MessageMessage that started it · 1 line
Complete your task autonomously. Read BRIEF.md in this folder and follow it exactly. That file is your whole brief. Your FINAL message is the reply it asks for.
BriefPaint a picture · 52 lines BRIEF.md
Paint a picture
Paint one picture of your choosing in oil, at the easel of claude-paint, a simulator of oil paint on linen. Subject, composition and manner are yours. Work from what you know; don't use reference images or image models.
Your studio
- The folder [local path redacted] Work only there, and in your scratch folder.
- You paint at the easel, in one session: open it, paint a chunk, look at
the canvas, paint the next. The easel is
bin/easelin your studio; notes/easel_guide.md has its commands (open,do,look,note,save,close). - What is painted stays painted. There is no undo: paint over what you don't want.
- You mix your own paint on the palette, from the tubes, in the proportions you choose.
- Time passes on the painting's own clock: every mark takes the time a
hand takes, and
wait(minutes)lets it rest, as long as you like; paint dries as that time passes. Real time between commands doesn't count. The clock isn't a budget or a target. - Scratch: run
[local path redacted] studio-75c237, thenexport TMPDIR="<that folder>" TMP="<that folder>" TEMP="<that folder>"; write temporary files only there. - Wrap anything that might not finish in
timeout(a process that hangs doesn't end on its own).
The rules of the studio
- The easel is the only way to paint and to see the painting. Don't replay
or copy the session yourself, open a second one, or edit or restore its
files. (
bin/easel check, which verifies the log against the canvas, is fine.) - Look at the canvas with the easel's views. Don't read pixel values with other programs.
- Paint shapes and marks, not computed pictures: don't encode an image in masks, amounts or proportions.
What to read
notes/easel_guide.md; notes/studio_notes.md; notes/research/oil_paint_physics.md as needed.
Working
- You make every artistic decision.
- Look at your painting often, whole and close up.
- Keep a working journal with
bin/easel note "..."as you go: your own working notes. Add to it; don't rewrite earlier entries. - Develop the painting until you judge it complete. Then save it
(
bin/easel save) and close the session.
When you're done
Reply with the paths of the saved painting and its log, the painting's title if you give it one, and if you like a few sentences about the picture.
- GuideThe easel · 475 linesnotes/easel_guide.md
- Studio notesStudio notes · 245 linesnotes/studio_notes.md
- ResearchPhysics of 19th-century oil paint on canvas: sourced numbers for a simulator · 176 linesnotes/research/oil_paint_physics.md
Also opened on its own · 1 file
Files nothing pointed it to. Its own renders and writing are left out.
bin/easel· with cat
Notes
Painted at the easel, a passage at a time.
The video replays the painter’s strokes.
Shown in gallery light, lit from the upper left so the paint’s texture shows.
More paintings with a free subject
← → keys to browse · All paintings



