
69 minutes of painting, sped up.
Journal
First, middle and last entries.
- Day 1, 09:00Plan: a still life after the Chardin manner - a cream earthenware jug, two lemons and a knife on a stone ledge against a dark warm wall. Light from the upper left. Canvas 460mm, 1000x800 units, warm grey-ochre imprimatura over lead white. Table back edge ~y520, ledge front edge ~y690; jug centred x360, rim y190, base y600; lemons right of it about (600,590) and (705,560);…
- Day 20, 12:57Lemons repainted: seven piles from olive to pale, curved strokes along the long axis, 0.075 apart, dark to light, no blending. They turn now and read as lemons; stroke ends leave a scalloped texture I rather like. Next: the knife, blade on the table from under the front lemon, handle overhanging the ledge.
- Day 53, 15:15Varnished lightly (0.3 coats) on day 53; it warms and knits the olive wall and the grey ledge together. Finished. Title: Stoneware Jug with Two Lemons and a Knife. What I learned: in this medium the shadows of a pale object have to come from thin glazes over dry light paint, badgered within a whole field, not from opaque darker mixes, which the lead white swallows.
Read all 25 entries
Times are on the painting's own clock, which runs only while the painter paints or waits for paint to dry.
- Day 1, 09:00Plan: a still life after the Chardin manner - a cream earthenware jug, two lemons and a knife on a stone ledge against a dark warm wall. Light from the upper left. Canvas 460mm, 1000x800 units, warm grey-ochre imprimatura over lead white. Table back edge ~y520, ledge front edge ~y690; jug centred x360, rim y190, base y600; lemons right of it about (600,590) and (705,560); knife handle overhangs the front edge at lower right.
- Day 1, 12:48Wall laid in: a reddish umber/black first pass was too hot, so an olive grey (umber, black, ochre, green earth) over it. A lighter scumble at right came out as a hard-edged cloud; covered with a mid mixture and blended the whole wall twice at crossing angles -> now a quiet gradation, darker left, lighter right. Lesson: blend the whole field, not a soft-edged zone - blending a zone leaves its outline. Handle got smeared by blending; will repaint.
- Day 1, 14:38Dead colour on jug and lemons. Modelled with form-value zones (shadow/half/light) wet into wet, but the secondary passes came out as separate short dabs (scaly) and a full badger blend then averaged everything to one flat mid value - jug and lemons now read as flat cut-outs. Lesson: the 40-unit blender over a whole small object erases the modelling. Plan: let this lay-in dry, then model in a second layer over it with stronger darks, working transitions with scumbles and small-area blending only.
- Day 4, 09:12Shadow pass from the ellipsoid scaffold spilled outside the scaffold (value is low off the solid) onto the lit edge and spout; patched. Small-blender on the terminator lifted rather than fused. Change of method: let it dry, then model the jug by hand in vertical strokes following its contour, strip by strip from light (left) to dark (right) with a graded string of seven piles, so neighbouring strips fuse wet-into-wet where they meet.
- Day 8, 09:25Hand-planned vertical strips gave structure but read as stripes; one vertical blend (badger 20) fused them and again pulled the whole jug up to a pale cream. Accepting that as the light underlayer. Next: once dry, put the shadow side in with thin glazes clipped to nested soft masks (clip weighs by mask value, so soft masks give soft transitions) instead of blending.
- Day 10, 09:42Shadow glaze on the jug first went on as blotches (cow pattern) - glaze strokes with some white in them are too opaque and coverage too low; blending the new wet layer over the dry cream fused it into a readable gradation from cream light to a grey shadow side. The jug turns now. Next: cast shadows on wall and table, then rim/opening, spout, handle, reflected light.
- Day 10, 10:09Cast shadow of the jug on the wall: glazed, then blended locally -> hard outline of the blended zone again; a whole-wall blend dissolved it into a soft smoky shadow right of the jug. Keeps confirming: blend whole fields. The jug shadow side is too dark and purple-grey, and the light is a narrow band - next layer: scumble lights and half tones over it when dry, with a warm reflected light at the right edge.
- Day 11, 23:25Scumbles and strips of lead-white mixtures on the jug: clip does not soften at a mask ramp, it cut hard bands; a dark strip laid into the wet pale lifted it and came out pale; a blend then pulled the whole jug to cream again. Lead white dominates every wet mix here. Decision: treat this cream as the light body and model the shadow only with transparent glazes (no white) over it once dry, blending each glaze while wet with the blend zone reaching well into the lit side.
- Day 15, 23:45Pure umber/green-earth/black glaze on the jug went on far too dark; lifted it with a clean flat wiped after each stroke, then blended - most came off, leaving a speckled light-brown veil over the shadow side. From across the room it reads like salt-glazed stoneware, which I will lean into: a stoneware jug. Shadow core still needs a thin, dilute glaze later.
- Day 15, 23:58Lemon shadow glaze started everywhere (the value scaffold is low over most of the lemons) and blending smeared it olive; lifted with a wiped clean flat and blended back to a slightly dulled yellow. Glazing with work() is not giving me control. For the lemons I will paint direct opaque touches, dark crescent first then mids and lights, curved along the form, no blender.
- Day 18, 12:11Lemons painted in hand-planned curved strokes, five piles from olive shadow to pale yellow light - they turned. Then a badger blend at 0.6 rad dragged it all into diagonal streaks. No more blender on small forms. Will repaint lemons once dry, more steps, overlapping strokes, no blending. Now the table.
- Day 18, 12:36Table top re-laid a tone darker (cooler stone) with the cast shadows of jug and lemons worked in wet, falling right and back. Jug: opening ellipse with dark inner wall at left, lighter at right; light front rim; spout lip; handle repainted as a curved strap with light top edge. Handle a little too pale for the shadow side - revisit.
- Day 20, 12:57Lemons repainted: seven piles from olive to pale, curved strokes along the long axis, 0.075 apart, dark to light, no blending. They turn now and read as lemons; stroke ends leave a scalloped texture I rather like. Next: the knife, blade on the table from under the front lemon, handle overhanging the ledge.
- Day 20, 13:01Wrote an endless loop in a chunk (the arris strokes never reached the end of the ledge); the easel hung, I stopped its process and reopened, and it replayed the 54 logged chunks. The failed chunk left nothing. Rerunning it fixed.
- Day 20, 13:05Knife: grey blade with a light top edge and cast shadow on the table, bolster, dark wood handle over the ledge. Blending the handle shadow dragged the still-wet handle paint into a big brown oval on the front face; lifted most of it with a wiped flat. Front face to be re-laid whole when dry, with the handle shadow in wet and a whole-face horizontal blend.
- Day 23, 01:35Shadow half of the jug: broken strokes read as stripes, so I badgered the right half (t>0.4, a whole field with its edge inside the turning light). Now smooth but too uniform and pale; no shadow core. Letting it dry, then a single wet layer of core, half-tone and reflected light blended within the same field.
- Day 25, 13:39Opaque shadow mixes on the jug again came out far too pale once blended; lead white wins. The guide has pile medium (0-0.95) for transparent glazes, which I had missed. Next, once dry: a thin umber glaze in the core rather than more opaque paint.
- Day 28, 13:45Umber glaze (medium 0.88) in the jug core: laid as separate yellow-brown strokes, then badgered across and down the right-half field. It became a warm mottled half-tone, like salt glaze. Right direction, still too light; a second, cooler glaze once dry.
- Day 31, 13:55Second glaze, umber with black and green earth, badgered the same way, then one horizontal pass over the whole body to soften the terminator. The jug turns now: cream light, mottled warm-grey shadow. Remaining: the handle (too pale), the halo and scallops along the left contour, a base contact shadow, a highlight.
- Day 35, 14:43Cut the wall back along the jug contour with a lighter olive, then badgered the whole wall. The first pass pulled the fresh paint out in flame-like streaks; three more passes with a 40 badger in three directions melted them into a soft glow round the jug. Wall reads as air again, contour clean.
- Day 38, 14:48Opening repainted: dark left, warm grey lit inner wall at right. The back rim was re-drawn and the front rim put into half-tone where it turns into shadow. Added a contact shadow under the jug. A glaze on the handle came out as dark ticks; the handle is still too pale. Next, when dry: an opaque darker strap on the handle, the orange speck inside the loop, the dirty lower-left belly, and a highlight.
- Day 41, 14:53Mistake: badgering a horizontal band across the lower jug pulled the fresh cream strokes over the shadow side and left a line at the band top. Lifted most of it with a clean wiped flat. What is left, a pale haze low on the right, gets a glaze when dry. Rule again: no blends across a light/dark boundary unless the dark is the wet part.
- Day 44, 15:12Lemons: a stipple of deeper yellow for the pitted skin, small pale highlights, nib accents, and an olive glaze where the front lemon shadows the back one. Contact shadows went in too low and hard, floating under the lemons; wiped them out. Re-doing them in table colour when dry. Also a darker strap on the handle and a glaze over the pale haze low on the jug shadow side.
- Day 48, 15:13Lemons now sit on the ledge: table colour laid round their undersides and a thin dark contact line hugging the edge. A darker umber strap on the descending handle makes it turn away from the light. Whole view: jug, lemons, knife and ledge hold together in a quiet, warm, low key. I am calling it finished rather than working the jug further, since every extra pass there has cost as much as it gave. Letting it dry, then a light varnish.
- Day 53, 15:15Varnished lightly (0.3 coats) on day 53; it warms and knits the olive wall and the grey ledge together. Finished. Title: Stoneware Jug with Two Lemons and a Knife. What I learned: in this medium the shadows of a pale object have to come from thin glazes over dry light paint, badgered within a whole field, not from opaque darker mixes, which the lead white swallows.
What it was given
All 8 items, in order
Long documents open on their own pages.
Systemthe default prompt of pi, the coding-[local account redacted] program the painter ran in · 97 lines
This is pi's default coding-assistant prompt (the painter ran as a general coding [local account redacted]).
Sent first: pi's Anthropic request template
You are Claude Code, Anthropic's official CLI for Claude.
Opening · 1 line
You are an expert coding assistant operating inside pi, a coding [local account redacted] harness. You help users by reading files, executing commands, editing code, and writing new files.
Tools, in brief · 16 lines
- bash: Execute bash commands (ls, grep, find, etc.)
- todo: Manage a task list to track multi-step progress
- bg_start: Start a genuinely asynchronous task for concurrent work or later interaction
- bg_wait: Wait for finite completion and return the latest pipe log line
- bg_status: Inspect background task status with the latest pipe log line
- bg_logs: Read full task output when a latest-line summary is insufficient
- bg_send: Send a compact text/key input string or an OS signal to a background task
- bg_kill: Terminate an unresponsive background task
- subagent: Spawn a sub-[local account redacted] in a dedicated terminal herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT call subagents_list or any other tool to 'check' status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate, assume, or summarize results after calling this tool. After spawning, either end your turn immediately, or work on other independent tasks (including spawning more subagents in parallel). The harness will wake you with the result when it is ready.
- subagent_interrupt: Send Escape to the active turn of a currently running Pi-backed subagent. The child pane, session, watcher, and running entry remain alive; this returns only a local acknowledgement and does not emit a subagent_result solely because of this request.
- subagents_list: List all available subagent definitions. Scans project-local .pi/agents/ and global [local path redacted] Project-local agents override global ones with the same name.
- subagent_resume: Resume a previous sub-[local account redacted] session in a new herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the resumed sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT poll for status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate or assume results. After resuming, either end your turn or work on other independent tasks; the harness will wake you when the result is ready. Use when a sub-[local account redacted] was cancelled or needs follow-up work.
In addition to the tools above, you may have access to other custom tools depending on the project.
Rules · 48 lines
- Use bash for file operations like ls, rg, find
- You can inspect PI_* environment variables for current model and session details.
- Use
todofor complex work with 3+ steps, when the user gives you a list of tasks, or immediately after receiving new instructions to capture requirements. Skip it for single trivial tasks and purely conversational requests. - When starting a task from the todo list, mark it in_progress BEFORE beginning work. Mark it completed IMMEDIATELY when done — never batch completions. Exactly one task in_progress at a time.
- Never mark a task completed if tests are failing, the implementation is partial, or you hit unresolved errors — keep it in_progress and create a new task for the blocker instead.
- Task status is a 4-state machine: pending → in_progress → completed, plus deleted as a tombstone. Pass activeForm (present-continuous label, e.g. 'researching existing tool') when marking in_progress.
- To change a task's status, call update with the task id and the target status, e.g. {"action":"update","id":3,"status":"completed"} or {"action":"update","id":3,"status":"in_progress","activeForm":"writing tests"}. status is the field that changes the task; an update without a mutable field (status or another) is rejected.
- Use blockedBy to express dependencies (A is blocked by B). On create, pass blockedBy as the initial set. On update, use addBlockedBy / removeBlockedBy (additive merge — do not resend the full array). Cycles are rejected.
- list hides tombstoned (deleted) tasks by default; pass includeDeleted:true to see them. Pass status to filter by a single status.
- Subject must be short and imperative (e.g. 'Research existing tool'); description is for long-form detail. activeForm is a present-continuous label shown while in_progress.
- Use bg_start only when the user explicitly requests background execution, the process must remain available for later interaction (for example, a server, watcher, or TUI), or you will perform independent useful work concurrently while it runs.
- Do not use bg_start merely because a command may be slow. If background execution was not explicitly requested and you need its result before any independent work can proceed, use the bash tool with an appropriate timeout instead of bg_start → bg_wait → bg_logs.
- Give each bg_start task a unique name; names are compared case-insensitively across all currently retained tasks.
- Use the Environment returned by bg_start and later bg_* results as the task's immutable launch location; an SSH task stays on that target and cwd even if the active workspace changes.
- Set bg_start pty=true only for terminal-aware or interactive TUI programs; keep the default pipe mode for ordinary builds and servers.
- Once bg_start is justified, compose complete bg_* workflows in one assistant response. Every bg_* id accepts a task ID or unique name, and same-task calls execute strictly in source order, not in parallel. For example, emit bg_start(name="tests") → bg_wait(id="tests") → bg_logs(id="tests") together; for an existing task, emit bg_wait → bg_logs together. Different tasks execute in parallel, and bg_status without id is independent.
- A running bg_start task survives ordinary [local account redacted] runs but session reload or shutdown terminates it. A task finishing during a run is normally retained through that run; a task that was still running when the [local account redacted] settled and then finishes while idle is normally retained through the next run.
- Use bg_wait only for finite bg_start tasks whose completion is needed. bg_wait includes the latest pipe log line when available; place bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed. Do not poll either tool.
- Use bg_wait once when completion of an already-justified finite bg_start task is required; never create a bg_start task solely so you can wait on it.
- bg_wait returns completion status plus the latest pipe log line when available. Emit bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed; do not wait for the bg_wait result before emitting bg_logs.
- A bg_wait timeout leaves the task running and still returns the latest pipe log line; a following same-response bg_logs call reads fuller output retained at that point.
- Do not use bg_wait for persistent servers or watchers, and do not immediately wait again after a timeout unless the user asks you to keep waiting.
- Do not poll bg_status after bg_start; use bg_wait once when a finite task's final status is required.
- Use bg_status only for requested task metadata, recovering a missing task reference, or diagnosing task state.
- Use bg_status without id only when the task ID or name is unknown and a retained-task list is needed.
- bg_status includes the latest pipe log line when available; use bg_logs for full or multiline pipe output and for all PTY terminal output.
- Use bg_logs when you need more than the latest pipe log line returned by bg_wait or bg_status, or when you need any PTY terminal output.
- Use bg_logs with tail=N for recent output; omit stream to use the correct default for either pipe or PTY mode.
- Do not poll with bg_logs. When fuller finite output is needed, emit bg_wait followed by bg_logs in the same assistant response; source ordering makes bg_logs run after bg_wait.
- Provide exactly one of bg_send input or signal. bg_send input is exact text; wrap every terminal key in an angle-bracket token such as <C-d>, <A-f>, <Space>, or <Up>, and escape a literal '<' as <.
- Use bg_send input for terminal keys; use bg_send signal only when an OS process signal is explicitly intended.
- For a pipe task, bg_send input=<C-d> or input=<EOF> closes stdin.
- When bg_send is followed by waiting or output inspection, emit bg_send → bg_wait → bg_logs together in one assistant response so same-task source ordering avoids extra model rounds.
- For a disconnected adapter task, bg_send input is unavailable because the local transport is gone, but bg_send signal may remain usable for cleanup.
- Use bg_kill when a background task must be terminated.
- Use bg_kill with force=true to send SIGKILL immediately; otherwise bg_kill sends SIGTERM.
- bg_kill returns termination status only. When final output is needed, emit bg_kill followed by bg_logs in the same assistant response.
- Default to a bare spawn: write the task (and, if useful, systemPrompt, tools or skills) for the job at hand. Use a named [local account redacted] only when one listed below clearly fits.
- Omit model and thinking when invoking a named [local account redacted] so its configured defaults apply. Passing either field is an explicit one-off override and takes precedence over [local account redacted] frontmatter.
- For a bare spawn, omit model and thinking to inherit the parent runtime.
- When an intentional runtime override is necessary, prefer changing thinking before changing models: minimal/low for bounded mechanical work, medium for ordinary implementation or review, and high+ for architecture, concurrency, security, or hard diagnosis.
- When overriding a subagent model, use an exact authenticated provider/model-id from the live catalog below. Do not invent aliases or fuzzy names.
- Available named subagent catalog becomes available after session start.
- Authenticated subagent model catalog becomes available after session start.
- Be concise in your responses
- Show file paths clearly when working with files
Pointers to pi's documentation · 10 lines
Pi documentation (read only when the user asks about pi itself, its SDK, extensions, themes, skills, or TUI):
- Main documentation: [local path redacted]
- Additional docs: [local path redacted]
- Examples: [local path redacted] (extensions, custom tools, SDK)
- When reading pi docs or examples, resolve docs/... under Additional docs and examples/... under Examples, not the current working directory
- When asked about: extensions (docs/extensions.md, examples/extensions/), themes (docs/themes.md), skills (docs/skills.md), prompt templates (docs/prompt-templates.md), TUI components (docs/tui.md), keybindings (docs/keybindings.md), SDK integrations (docs/sdk.md), custom providers (docs/custom-provider.md), adding models (docs/models.md), pi packages (docs/packages.md), environment variables (docs/environment-variables.md)
- When working on pi topics, read the docs and examples, and follow .md cross-references before implementing
- Always read pi .md files completely and follow links to related docs (e.g., tui.md for TUI API details)
Addendum · 12 lines
Responsive communication
When the user requests work, begin with one or two short, specific sentences acknowledging the request and stating your next action before calling tools. Do not wait until the work is complete to speak. If the request can be answered immediately, answer directly instead of adding a separate acknowledgment.
When a new user message arrives during work, address it at your next opportunity before continuing. Respect the harness's existing steering, queuing and cancellation behavior; this instruction does not authorize interrupting or restarting running operations.
Keep updates conversational and useful. Avoid flattery, stock apologies, corporate jargon, repeated acknowledgments and generic wrap-ups. State intentions as intentions, not completed actions. Do not claim a result before checking it. Preserve the user's explicit formatting and style preferences.
This is a communication preference, not a reason to skip necessary reasoning, verification or safety checks.
Working folder · 3 lines
[local path redacted]
- ToolsTools it could call · 16 tools
MessageMessage that started it · 1 line
Complete your task autonomously. Read BRIEF.md in this folder and follow it exactly. That file is your whole brief. Your FINAL message is the reply it asks for.
BriefPaint a picture · 52 lines BRIEF.md
Paint a picture
Paint one picture of your choosing in oil, at the easel of claude-paint, a simulator of oil paint on linen. Subject, composition and manner are yours. Work from what you know; don't use reference images or image models.
Your studio
- The folder [local path redacted] Work only there, and in your scratch folder.
- You paint at the easel, in one session: open it, paint a chunk, look at
the canvas, paint the next. The easel is
bin/easelin your studio; notes/easel_guide.md has its commands (open,do,look,note,save,close). - What is painted stays painted. There is no undo: paint over what you don't want.
- You mix your own paint on the palette, from the tubes, in the proportions you choose.
- Time passes on the painting's own clock: every mark takes the time a
hand takes, and
wait(minutes)lets it rest, as long as you like; paint dries as that time passes. Real time between commands doesn't count. The clock isn't a budget or a target. - Scratch: run
[local path redacted] studio-3be9e8, thenexport TMPDIR="<that folder>" TMP="<that folder>" TEMP="<that folder>"; write temporary files only there. - Wrap anything that might not finish in
timeout(a process that hangs doesn't end on its own).
The rules of the studio
- The easel is the only way to paint and to see the painting. Don't replay
or copy the session yourself, open a second one, or edit or restore its
files. (
bin/easel check, which verifies the log against the canvas, is fine.) - Look at the canvas with the easel's views. Don't read pixel values with other programs.
- Paint shapes and marks, not computed pictures: don't encode an image in masks, amounts or proportions.
What to read
notes/easel_guide.md; notes/studio_notes.md; notes/research/oil_paint_physics.md as needed.
Working
- You make every artistic decision.
- Look at your painting often, whole and close up.
- Keep a working journal with
bin/easel note "..."as you go: your own working notes. Add to it; don't rewrite earlier entries. - Develop the painting until you judge it complete. Then save it
(
bin/easel save) and close the session.
When you're done
Reply with the paths of the saved painting and its log, the painting's title if you give it one, and if you like a few sentences about the picture.
- GuideThe easel · 475 linesnotes/easel_guide.md
- Studio notesStudio notes · 187 linesnotes/studio_notes.md
- ResearchPhysics of 19th-century oil paint on canvas: sourced numbers for a simulator · 176 linesnotes/research/oil_paint_physics.md · it read lines 1–97, 99–117, 120
SummarySummary it continued from after its context was compacted · 52 lines
Continuation summary
Brief (from BRIEF.md, to be followed exactly): Paint one oil picture at the claude-paint easel (
bin/easelin[local path redacted]). Subject and manner are my choice. No reference images or image models. Work only in the studio and in scratch. Scratch is[local path redacted]; start each bash call withexport TMPDIR=... TMP=... TEMP=...andcdto the studio. Wrap commands intimeout. The easel is the only way to paint or see the canvas: don't read pixels with other tools, don't edit or replay the log, and don't open a second session (bin/easel checkis allowed). Paint shapes and marks, not computed images. Add journal entries often withbin/easel note "..."and never rewrite earlier ones. Look at the whole canvas and at close-ups often. When I judge it complete, runbin/easel saveand thenbin/easel close. Final reply: the paths of the saved painting (out/easel/painting/painting.png) and the log (paintings/lua/painting.lua), the title, and a few optional sentences about the picture.Workflow: I write chunks to
$TMPDIR/cNN.lua, runtimeout 900 bin/easel do -f $TMPDIR/cNN.lua, thentimeout 60 bin/easel look [--crop x0,y0,x1,y1] [--size N]and Read the PNG it prints. The session is open, at chunk 50, painting clock about day 18.Subject: a Chardin-like still life. A cream stoneware jug (now leaning into a salt-glaze look), two lemons and, still to come, a knife on a stone ledge against a dark olive wall. Light comes from the upper left. Canvas: 460 mm, aspect 1.25 (W=1000, H=800), linen {17,13}, seed 7, lead-white ground with a warm grey-ochre imprimatura.
Session globals defined:
- Scene masks and edges:
jugL,jugR(jug outline point lists, y 192→600),jugBody,spout,handle(ribbon centreline {{420,236},{468,234},{505,256},{510,300},{492,355},{474,392}}),jug;lemon1,lemon2,lemons(with nibs);table_top= rect(0,521,1000,169),front= rect(0,690,1000,110),wall= rect(0,0,1000,521). - Forms:
jf(jug form),jVal,jSil,lf(lemon form). - Functions:
edgeX(list, y),jT(x, y)(0 at the jug's left edge, 1 at its right),jIdx,strips(t0,t1,pile,brush,y0,y1,n,opt),jZone(...),lemonPaint(cx,cy,rx,ry,rot,clipm,brush,step). - Other masks:
wallShadow,jugTabShadow,lemShadow,opening. - Piles:
- Jug values:
jp[1..7](1 lightest cream … 6 dark, 7 warm reflected light),jDark,jDeep,jHalf,jShadow,jLight,jLightEdge,gzA,gz1. - Rim interior:
inDark,inMid. - Lemons:
lp[1..5](olive shadow … pale yellow),lMid,lShadow,lLight,lBase,lz. - Wall:
bgDark,bgWarm,bgOlive,bgLight,bgMid,shG. - Table:
tTop,tBack,tFront,tTop2,tShad.
- Jug values:
Current state:
- Wall: soft olive-grey gradation, darker at left, with a smoky jug shadow to the right of the jug. Good.
- Table top: mid warm grey, with soft cast shadows from the jug (toward the back-right) and the lemons (chunk 49, still wet).
- Front face: dark and plain.
- Jug:
- Body: the lit left side is cream; the right side is a speckled light-brown veil with crosshatch texture and weak modelling.
- Rim and spout (chunk 50, just done): dark opening ellipse with a lighter right part, a light front rim, a back rim line and the spout lip. The rim reads, but the jug's top edge is still somewhat flat.
- Handle: a smeared, flat strap that needs repainting.
- Lemons: blending (chunk 48) streaked them diagonally; they need a full repaint once dry.
Lessons learned (in the journal):
- A badger blend over a whole small object averages away the modelling. Blending a partial zone leaves the zone's outline, so blend whole fields only (the whole-wall blend worked).
- Lead-white mixes dominate wet-into-wet: darks laid into wet pale come out pale.
clipgives hard edges even at soft mask ramps.work()passes with a soft mask plus a threshold lay scaly separate dabs.- Pure glazes (umber/green earth/black) go on far too dark. A clean brush with
b:wipe(1)after each stroke lifts wet paint effectively. - A form's value is low outside its solid, so scaffold masks spill beyond it.
- What works: hand-planned
b:strokemarks following the form, lights and darks as separate strokes, laid over dry underpaint without blending. - Drying: about 2–3 days (
wait) for these layers to reach "dry".
Outstanding tasks:
- Handle: repaint with strokes along its length (shadowed body, a lit upper arc) and tidy the background inside the loop.
- Jug:
- a thin, dilute shadow core on the right (t ≈ 0.65–0.9)
- a faint reflected light at the right edge
- contact shadow at the base
- a highlight on the upper-left belly and neck
- clean the silhouette edges
- Lemons (once dry): repaint with
lemonPaintusing a smaller step and more intermediate piles, with no blending. Add highlights, nibs, a little pitted-skin stipple, and reflected light at the bottom. - Knife: blade on the table from about (560,670) to (800,712); dark wooden handle overhanging the ledge edge to about (940,770); its shadow on the front face.
- Front edge: a lit line along the top of the front face at y≈690, plus some variation on the face.
- Final looks at the whole (value/squint modes). Optional
varnishonce everything is touch-dry. Then journal,bin/easel save,bin/easel close, and the final reply with a title (e.g. "Stoneware Jug with Two Lemons").
- Scene masks and edges:
Also opened on its own · 2 files
Files nothing pointed it to. Its own renders and writing are left out.
bin/easel· with catpaintings/lua/painting.lua· with tail and sed
Notes
Painted at the easel, a passage at a time.
The video replays the painter’s strokes.
Shown in gallery light, lit from the upper left so the paint’s texture shows.
More paintings with a free subject
← → keys to browse · All paintings



