Paintings / After Friedrich
A flat Baltic plain late on a summer day: a man and a woman seen from behind on a footpath look toward a small town with three brick church towers between two post mills, across meadows with pollard willows, horses, cows, haycocks and a hay wagon.

47 minutes of painting, sped up.

Journal

First, middle and last entries.

  1. Day 1, 09:00Plan. A summer evening on the flat meadows outside a small Baltic town, in the manner of Friedrich's Greifswald meadows but my own composition. Wide format 1.55:1, low horizon at y~392 so the sky takes three fifths. Town silhouette with three church towers right of centre (x 560-740), windmills on the horizon at left and right, a ditch of still water crossing the middle ground…
  2. Day 22, 07:29Day 22. The couple painted from behind on the path: he in a dark blue-black greatcoat, cap, light trousers, a stick; she in a red-brown dress with a cream shawl and her hair up; long cast shadows to the right. Shawl picked up red from the wet dress, to be restated. Four horses grazing in the middle meadow (bay, gray, black, chestnut), a dozen haycocks with short shadows on the…
  3. Day 106, 02:48Day 106. After 45 days everything was touch-dry; a light mastic varnish (0.25 coats) laid over the whole. It warms and binds the greens and grays the sky a little, as his pictures look now. Finished: 'Summer Evening on the Meadows before the Town'.
Read all 13 entries

Times are on the painting's own clock, which runs only while the painter paints or waits for paint to dry.

  1. Day 1, 09:00Plan. A summer evening on the flat meadows outside a small Baltic town, in the manner of Friedrich's Greifswald meadows but my own composition. Wide format 1.55:1, low horizon at y~392 so the sky takes three fifths. Town silhouette with three church towers right of centre (x 560-740), windmills on the horizon at left and right, a ditch of still water crossing the middle ground reflecting the sky, a row of pollard willows along it at left, grazing horses and haycocks in the middle meadows, and in the foreground a darker rising bank with a path and a couple seen from behind looking toward the town. Light: late sun low from the left, warm glow at the horizon, pale smalt sky above. Ground: warm red-ochre knife layer under a patchy brushed lead-white top, as his bought canvases.
  2. Day 1, 12:34Day 1. Pencil underdrawing (2H): horizon, ditch, towers, mills, willows, the two figures. Sky laid in ten graded bands, first far too pale (smalt is weak), so restated the upper third with smalt+cobalt and a touch of Prussian, then three rounds of long level badger passes: now a smooth gradient from mid blue to a warm cream at the horizon. A low violet-gray cloud bank at left (very faint, may glaze it stronger later) and thin warm evening streaks. Land laid in thin in five horizontal zones, blue-gray far strip to olive foreground; unclipped strokes left spikes above the horizon line, to be hidden under the tree lines and town. Blending the land raised a few pale blotches; it is only the underpainting. Letting it dry before the second layer.
  3. Day 4, 17:03Day 4. Distant tree lines stippled along the horizon: came out as round gray balls, too blobby; a paler haze stipple into them just fused. Will restate them dry with flatter, more varied silhouettes. Town: first pass pale and minaret-thin; restated with broader towers (a tall spire left, a massive tower with low cap and lantern in the middle, a second spire right) and long high nave roofs. Far fields: laid as a patchwork of strips which looked like a striped flag, so blended it level and veiled it; the veil strokes left pale arcs, three more rounds of long badger took them out. Now a soft, hazy band that needs structure (hedgerows, field edges) once dry. Middle meadow green restated; foreground graded from a warm lit crest down to a dark umber-green bottom. Waiting a day.
  4. Day 10, 12:05Day 10. Town restated when dry: lit west faces in a warm rose-gray, shadow sides glazed with smalt/umber, belfry slits and nave windows with a pointed round. The ghost of the first right-hand spire showed as a split apex; painted the spire a little blunter to swallow it. Distant woods rebuilt as rows of crowns with flat bases, plus a few poplars; still rather flat gray. Stepping back: the far-meadow band (398-467) is too pale and sandy, and meets the green middle meadow in a hard horizontal line across the whole width. Needs a greener, deeper, graded restatement with hedgerows, and a transition into the green. Waiting for it to dry.
  5. Day 15, 21:12Day 15. Far meadows restated in four graded greens (blue-green at the horizon to warm sunlit green), blended level: the plain now recedes. Lit upper-left rims stippled on the distant woods once dry. Footpath laid up the rise: came out as a bright tan ribbon with scalloped edges, and the glaze/lose pass made it look like crumpled paper. Will narrow it with grass and glaze it down once dry. The ditch: a clean white diagonal line straight across the plain, reading as a scratch, and it leads the eye away from the town. Decision: keep only the near-left stretch by the willows, paint the rest out with meadow green once dry, and leave a couple of small glints of water farther along.
  6. Day 20, 14:03Day 20. Painted the ditch out east of x~336 with matched meadow greens (two small glints kept). Left stretch toned to a pale blue-gray with a dark far-bank lip; still too clean and straight, willows and reflections should break it. Path narrowed with grass from both sides; a glaze laid across it left ladder stripes, blended along the track, now a thin worn trace. Two post mills on the horizon, trestle, body with lit west side, lattice sails. Hedgerows across the plain: beaded and too gray/blue, to be broken and greened when dry. Five pollard willows along the ditch: crowns came out pale cotton-balls, shade stipple fused into the wet; second pass when dry.
  7. Day 22, 07:29Day 22. The couple painted from behind on the path: he in a dark blue-black greatcoat, cap, light trousers, a stick; she in a red-brown dress with a cream shawl and her hair up; long cast shadows to the right. Shawl picked up red from the wet dress, to be restated. Four horses grazing in the middle meadow (bay, gray, black, chestnut), a dozen haycocks with short shadows on the right. Stepping back the picture now reads: plain, town, figures. To do: willows darker and more silvery-green, ditch reflections, a proper foreground (thinking a granite erratic at right with stones, grasses, a few flowers), hedgerow tones, lit edges on figures and horses, birds.
  8. Day 27, 17:42Day 27. Willows second pass when dry: silver-green stipple over the pale crowns, darker shade side and hollows, pale silvery lights at the upper left, fine rods rising from the heads; grayer bark, knobbly heads. Water veiled cooler and darker; trunk reflections as short broken dark strokes. Foreground broken with clustered stipple of darker and lighter greens (the lighter reads as a buttercup meadow along the crest). A granite erratic at right, modeled with a form: came out pale as a loaf, and the speckle made terrazzo. In value+squint it is the brightest thing on the land. It must go much darker with only the upper-left catching the evening light; waiting for it to dry.
  9. Day 34, 09:39Day 34. Boulder repainted dry: body mid-dark gray, darker shadow side, warm scumbled light on top. A wet blend then smeared it all to a light muddy beige; must glaze it down dry. Foreground: ~7000 pointed-round blades, dark and mid first sparse light ones read as yellow hairs, so a second, denser dark/mid layer unified it. Hay wagon on the right with two horses harnessed, a man on the load with a fork and one handing up hay. Seven birds flying home above the horizon left of the town. Horses given cast shadows and warm light on their backs. Hedges greened and lit on top. Ditch glazed cool so it sits down in the meadow, a few sky glints. Willow crowns glazed: far too dark and dull, lifted a little with a clean badger; they need silvery touches when dry. Added three cows beyond the willows and a white stork on the near bank.
  10. Day 39, 12:28Day 39. Silvery stipple on the willows' upper-left clumps brought back the willow character up close, but in the whole view they now read almost as white blossom, spring not summer; a light green glaze needed. Foreground flowers: yarrow, daisies, buttercups, a few red clover and cornflowers, grass stalks with seed heads; subtle, only visible up close, as intended. Boulder: a dark umber/smalt glaze made it chocolate; a cool scumble into the wet glaze then covered the left half too strongly, so it reads as a two-tone blob, snow on top. Lesson: stop working it wet. Let it dry fully and build it with thin passes.
  11. Day 55, 14:29Day 55. Boulder finally: dry cool veil to unify, then a transparent smalt/umber/black glaze graded by the form's value and toward the ground; the glaze sits in the weave and reads as granite grain. Warm stipple on the upper-left ridge, grass tufts dark and mid over its foot (a first row of light blades made a yellow fringe). Willows given a light green glaze, now summer silver-green. A post-and-rail fence receding across the shaded meadow on the right; finials on the three spires, eave and ridge lines on the naves; a small flock with shepherd, crook and dog in the far fields. Mistake: the red dress glaze used the skirt polygon, which runs up under the shawl, so the shawl is streaked red again; restate it when dry. Also a pale smear where the ditch ends, at x~335.
  12. Day 61, 02:45Day 61. Ditch end tapered with converging grass banks and a clump of rushes instead of the hard cut. Shawl restated clean in cream over the dry red, with shade on the right, fringe along its point and a fold. Faint windrows of cut hay between the haycocks on the right, so that field reads as being mown. I think the picture is complete: town, plain, figures, detail at every distance. Letting everything dry thoroughly before a light mastic varnish.
  13. Day 106, 02:48Day 106. After 45 days everything was touch-dry; a light mastic varnish (0.25 coats) laid over the whole. It warms and binds the greens and grays the sky a little, as his pictures look now. Finished: 'Summer Evening on the Meadows before the Town'.

What it was given

All 9 items, in order

Long documents open on their own pages.

  1. Systemthe default prompt of pi, the coding-[local account redacted] program the painter ran in · 97 lines

    This is pi's default coding-assistant prompt (the painter ran as a general coding [local account redacted]).

    Sent first: pi's Anthropic request template

    You are Claude Code, Anthropic's official CLI for Claude.

    Opening · 1 line

    You are an expert coding assistant operating inside pi, a coding [local account redacted] harness. You help users by reading files, executing commands, editing code, and writing new files.

    Tools, in brief · 16 lines
    • bash: Execute bash commands (ls, grep, find, etc.)
    • todo: Manage a task list to track multi-step progress
    • bg_start: Start a genuinely asynchronous task for concurrent work or later interaction
    • bg_wait: Wait for finite completion and return the latest pipe log line
    • bg_status: Inspect background task status with the latest pipe log line
    • bg_logs: Read full task output when a latest-line summary is insufficient
    • bg_send: Send a compact text/key input string or an OS signal to a background task
    • bg_kill: Terminate an unresponsive background task
    • subagent: Spawn a sub-[local account redacted] in a dedicated terminal herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT call subagents_list or any other tool to 'check' status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate, assume, or summarize results after calling this tool. After spawning, either end your turn immediately, or work on other independent tasks (including spawning more subagents in parallel). The harness will wake you with the result when it is ready.
    • subagent_interrupt: Send Escape to the active turn of a currently running Pi-backed subagent. The child pane, session, watcher, and running entry remain alive; this returns only a local acknowledgement and does not emit a subagent_result solely because of this request.
    • subagents_list: List all available subagent definitions. Scans project-local .pi/agents/ and global [local path redacted] Project-local agents override global ones with the same name.
    • subagent_resume: Resume a previous sub-[local account redacted] session in a new herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the resumed sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT poll for status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate or assume results. After resuming, either end your turn or work on other independent tasks; the harness will wake you when the result is ready. Use when a sub-[local account redacted] was cancelled or needs follow-up work.

    In addition to the tools above, you may have access to other custom tools depending on the project.

    Rules · 48 lines
    • Use bash for file operations like ls, rg, find
    • You can inspect PI_* environment variables for current model and session details.
    • Use todo for complex work with 3+ steps, when the user gives you a list of tasks, or immediately after receiving new instructions to capture requirements. Skip it for single trivial tasks and purely conversational requests.
    • When starting a task from the todo list, mark it in_progress BEFORE beginning work. Mark it completed IMMEDIATELY when done — never batch completions. Exactly one task in_progress at a time.
    • Never mark a task completed if tests are failing, the implementation is partial, or you hit unresolved errors — keep it in_progress and create a new task for the blocker instead.
    • Task status is a 4-state machine: pending → in_progress → completed, plus deleted as a tombstone. Pass activeForm (present-continuous label, e.g. 'researching existing tool') when marking in_progress.
    • To change a task's status, call update with the task id and the target status, e.g. {"action":"update","id":3,"status":"completed"} or {"action":"update","id":3,"status":"in_progress","activeForm":"writing tests"}. status is the field that changes the task; an update without a mutable field (status or another) is rejected.
    • Use blockedBy to express dependencies (A is blocked by B). On create, pass blockedBy as the initial set. On update, use addBlockedBy / removeBlockedBy (additive merge — do not resend the full array). Cycles are rejected.
    • list hides tombstoned (deleted) tasks by default; pass includeDeleted:true to see them. Pass status to filter by a single status.
    • Subject must be short and imperative (e.g. 'Research existing tool'); description is for long-form detail. activeForm is a present-continuous label shown while in_progress.
    • Use bg_start only when the user explicitly requests background execution, the process must remain available for later interaction (for example, a server, watcher, or TUI), or you will perform independent useful work concurrently while it runs.
    • Do not use bg_start merely because a command may be slow. If background execution was not explicitly requested and you need its result before any independent work can proceed, use the bash tool with an appropriate timeout instead of bg_start → bg_wait → bg_logs.
    • Give each bg_start task a unique name; names are compared case-insensitively across all currently retained tasks.
    • Use the Environment returned by bg_start and later bg_* results as the task's immutable launch location; an SSH task stays on that target and cwd even if the active workspace changes.
    • Set bg_start pty=true only for terminal-aware or interactive TUI programs; keep the default pipe mode for ordinary builds and servers.
    • Once bg_start is justified, compose complete bg_* workflows in one assistant response. Every bg_* id accepts a task ID or unique name, and same-task calls execute strictly in source order, not in parallel. For example, emit bg_start(name="tests") → bg_wait(id="tests") → bg_logs(id="tests") together; for an existing task, emit bg_wait → bg_logs together. Different tasks execute in parallel, and bg_status without id is independent.
    • A running bg_start task survives ordinary [local account redacted] runs but session reload or shutdown terminates it. A task finishing during a run is normally retained through that run; a task that was still running when the [local account redacted] settled and then finishes while idle is normally retained through the next run.
    • Use bg_wait only for finite bg_start tasks whose completion is needed. bg_wait includes the latest pipe log line when available; place bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed. Do not poll either tool.
    • Use bg_wait once when completion of an already-justified finite bg_start task is required; never create a bg_start task solely so you can wait on it.
    • bg_wait returns completion status plus the latest pipe log line when available. Emit bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed; do not wait for the bg_wait result before emitting bg_logs.
    • A bg_wait timeout leaves the task running and still returns the latest pipe log line; a following same-response bg_logs call reads fuller output retained at that point.
    • Do not use bg_wait for persistent servers or watchers, and do not immediately wait again after a timeout unless the user asks you to keep waiting.
    • Do not poll bg_status after bg_start; use bg_wait once when a finite task's final status is required.
    • Use bg_status only for requested task metadata, recovering a missing task reference, or diagnosing task state.
    • Use bg_status without id only when the task ID or name is unknown and a retained-task list is needed.
    • bg_status includes the latest pipe log line when available; use bg_logs for full or multiline pipe output and for all PTY terminal output.
    • Use bg_logs when you need more than the latest pipe log line returned by bg_wait or bg_status, or when you need any PTY terminal output.
    • Use bg_logs with tail=N for recent output; omit stream to use the correct default for either pipe or PTY mode.
    • Do not poll with bg_logs. When fuller finite output is needed, emit bg_wait followed by bg_logs in the same assistant response; source ordering makes bg_logs run after bg_wait.
    • Provide exactly one of bg_send input or signal. bg_send input is exact text; wrap every terminal key in an angle-bracket token such as <C-d>, <A-f>, <Space>, or <Up>, and escape a literal '<' as <.
    • Use bg_send input for terminal keys; use bg_send signal only when an OS process signal is explicitly intended.
    • For a pipe task, bg_send input=<C-d> or input=<EOF> closes stdin.
    • When bg_send is followed by waiting or output inspection, emit bg_send → bg_wait → bg_logs together in one assistant response so same-task source ordering avoids extra model rounds.
    • For a disconnected adapter task, bg_send input is unavailable because the local transport is gone, but bg_send signal may remain usable for cleanup.
    • Use bg_kill when a background task must be terminated.
    • Use bg_kill with force=true to send SIGKILL immediately; otherwise bg_kill sends SIGTERM.
    • bg_kill returns termination status only. When final output is needed, emit bg_kill followed by bg_logs in the same assistant response.
    • Default to a bare spawn: write the task (and, if useful, systemPrompt, tools or skills) for the job at hand. Use a named [local account redacted] only when one listed below clearly fits.
    • Omit model and thinking when invoking a named [local account redacted] so its configured defaults apply. Passing either field is an explicit one-off override and takes precedence over [local account redacted] frontmatter.
    • For a bare spawn, omit model and thinking to inherit the parent runtime.
    • When an intentional runtime override is necessary, prefer changing thinking before changing models: minimal/low for bounded mechanical work, medium for ordinary implementation or review, and high+ for architecture, concurrency, security, or hard diagnosis.
    • When overriding a subagent model, use an exact authenticated provider/model-id from the live catalog below. Do not invent aliases or fuzzy names.
    • Available named subagent catalog becomes available after session start.
    • Authenticated subagent model catalog becomes available after session start.
    • Be concise in your responses
    • Show file paths clearly when working with files
    Pointers to pi's documentation · 10 lines

    Pi documentation (read only when the user asks about pi itself, its SDK, extensions, themes, skills, or TUI):

    • Main documentation: [local path redacted]
    • Additional docs: [local path redacted]
    • Examples: [local path redacted] (extensions, custom tools, SDK)
    • When reading pi docs or examples, resolve docs/... under Additional docs and examples/... under Examples, not the current working directory
    • When asked about: extensions (docs/extensions.md, examples/extensions/), themes (docs/themes.md), skills (docs/skills.md), prompt templates (docs/prompt-templates.md), TUI components (docs/tui.md), keybindings (docs/keybindings.md), SDK integrations (docs/sdk.md), custom providers (docs/custom-provider.md), adding models (docs/models.md), pi packages (docs/packages.md), environment variables (docs/environment-variables.md)
    • When working on pi topics, read the docs and examples, and follow .md cross-references before implementing
    • Always read pi .md files completely and follow links to related docs (e.g., tui.md for TUI API details)
    Addendum · 12 lines

    Responsive communication

    When the user requests work, begin with one or two short, specific sentences acknowledging the request and stating your next action before calling tools. Do not wait until the work is complete to speak. If the request can be answered immediately, answer directly instead of adding a separate acknowledgment.

    When a new user message arrives during work, address it at your next opportunity before continuing. Respect the harness's existing steering, queuing and cancellation behavior; this instruction does not authorize interrupting or restarting running operations.

    Keep updates conversational and useful. Avoid flattery, stock apologies, corporate jargon, repeated acknowledgments and generic wrap-ups. State intentions as intentions, not completed actions. Do not claim a result before checking it. Preserve the user's explicit formatting and style preferences.

    This is a communication preference, not a reason to skip necessary reasoning, verification or safety checks.

    Working folder · 3 lines

    [local path redacted]

  2. ToolsTools it could call · 16 tools
  3. MessageMessage that started it · 1 line

    Complete your task autonomously. Read BRIEF.md in this folder and follow it exactly. That file is your whole brief. Your FINAL message is the reply it asks for.

  4. BriefPaint a picture · 58 lines BRIEF.md

    Paint a picture

    Compose and paint one original summer landscape in the manner of Caspar David Friedrich, at the easel of claude-paint, a simulator of oil paint on linen. The subject, hour and composition within the summer are yours. Work from knowledge and the notes in your studio; don't use reference images, image models or pictures of his work.

    Your studio

    • The folder [local path redacted] Work only there, and in your scratch folder.
    • You paint at the easel, in one session: open it, paint a chunk, look at the canvas, paint the next. The easel is bin/easel in your studio; notes/easel_guide.md has its commands (open, do, look, note, save, close).
    • What is painted stays painted. There is no undo: paint over what you don't want.
    • You mix your own paint on the palette, from the tubes, in the proportions you choose.
    • Time passes on the painting's own clock: every mark takes the time a hand takes, and wait(minutes) lets it rest, as long as you like; paint dries as that time passes. Real time between commands doesn't count. The clock isn't a budget or a target.
    • Scratch: run [local path redacted] studio-774267, then export TMPDIR="<that folder>" TMP="<that folder>" TEMP="<that folder>"; write temporary files only there.
    • Wrap anything that might not finish in timeout (a process that hangs doesn't end on its own).

    The rules of the studio

    • The easel is the only way to paint and to see the painting. Don't replay or copy the session yourself, open a second one, or edit or restore its files. (bin/easel check, which verifies the log against the canvas, is fine.)
    • Look at the canvas with the easel's views. Don't read pixel values with other programs.
    • Paint shapes and marks, not computed pictures: don't encode an image in masks, amounts or proportions.

    What to read

    notes/easel_guide.md; notes/studio_notes.md; notes/research/friedrich_materials.md (his materials and method, sourced); notes/research/trees.md (how trees are built) and notes/research/oil_paint_physics.md as needed.

    Working

    • You make every artistic decision.
    • Friedrich's pictures are full of small, particular details; don't stop at broad passages.
    • Look at your painting often, whole and close up.
    • Keep a working journal with bin/easel note "..." as you go: your own working notes. Add to it; don't rewrite earlier entries.
    • Develop the painting until you judge it complete. Then save it (bin/easel save) and close the session.

    When you're done

    Reply with the paths of the saved painting and its log, the painting's title if you give it one, and if you like a few sentences about the picture.

  5. GuideThe easel · 475 linesnotes/easel_guide.md
  6. Studio notesStudio notes · 247 linesnotes/studio_notes.md
  7. ResearchCaspar David Friedrich: materials and method · 237 linesnotes/research/friedrich_materials.md
  8. ResearchTrees: how they are built · 122 linesnotes/research/trees.md
  9. ResearchPhysics of 19th-century oil paint on canvas: sourced numbers for a simulator · 176 linesnotes/research/oil_paint_physics.md · it read lines 1–120
Also opened on its own · 1 file

Files nothing pointed it to. Its own renders and writing are left out.

  • bin/easel · with cat

Notes

Painted at the easel, a passage at a time.

The video replays the painter’s strokes.

Shown in gallery light, lit from the upper left so the paint’s texture shows.

More after Friedrich

← → keys to browse · All paintings