
30 minutes of painting, sped up.
Journal
First, middle and last entries.
- Day 1, 10:20Subject: an evening marsh, low horizon at y~441, creek winding up from the bottom to a point at the horizon right of center, dark tree mass on the left, a small copse right. Warm pinkish-ochre toned ground (lead white/ochre knifed, thin earth brushed over). Sky laid in four bands (smalt/cobalt grey top down to white+chrome yellow glow), two crossing blends fused them. Stratus…
- Day 25, 02:18Day 25. Water v3 in five graded horizontal piles came out near-white (lead white takes over again); will restate the near water darker/bluer, keep the far bend bright as the glow reflection. An earlier blend of a dark edge band across the creek smeared it all and left lattice: never blend across dry water. Foreground: 400+ tufts of pointed rigger blades (dark and mid olive)…
- Day 39, 08:13Day 39. Copse modelled with stippled under-shadow, cool tops and a warm left rim toward the sun: reads as a massed stand, less of a flat blob. Mirror view flagged the ruled meadow/foreground boundary; broke it with tall grass silhouettes against the lit meadow. Second graded blue at the top of the sky. Final crop of the punt: the poler still reads against the glow. Stopping…
Read all 8 entries
Times are on the painting's own clock, which runs only while the painter paints or waits for paint to dry.
- Day 1, 10:20Subject: an evening marsh, low horizon at y~441, creek winding up from the bottom to a point at the horizon right of center, dark tree mass on the left, a small copse right. Warm pinkish-ochre toned ground (lead white/ochre knifed, thin earth brushed over). Sky laid in four bands (smalt/cobalt grey top down to white+chrome yellow glow), two crossing blends fused them. Stratus clouds laid wet-in-wet in mauve piles came out pale pink (white took over); one horizontal blend softened them to a faint haze. Will restate cloud values once the sky sets.
- Day 6, 15:14Day 6. Relaid the marsh over the dry lay-in in four wavy bands (bluish olive far, warm ochre-olive mid, umber-green near), one horizontal blend: it now recedes. Narrowed creek via ribbon (widths are full widths; horizontal cross-section is wider on the diagonals). Trees: left group and right copse laid as clipped masses of roughened ellipses; they read as blobs/bushes, and their bases picked up wet marsh as pale streaks. Cloud streaks by hand (grey-mauve bodies, gold undersides) then two blends clear of the trees: soft, readable. Error: mid-left streaks crossed the wet tree crown; must repaint that crown. Next after drying: trees (sky holes, trunks, gaps under canopy, warm rim right side), marsh texture, banks, water tone.
- Day 12, 20:13Day 12. Carved the left blob into four trees by painting sky back (two coats, sky-matched piles by height) around a new silhouette with trunks and gaps under the canopy: it now reads as a group of elms. Stipples of cool tops / dark undersides into the wet crown base simply fused (as the notes say): redo when dry. Marsh hatch in lit/dark noise patches came out as bricks; two horizontal blends turned it into a warm sunlit meadow with soft shadows. Foreground relaid in brown/olive patches (camouflage) then blended three ways: unified but too light and a seam at y~530 from the blend mask edge. Next, after drying: glaze the foreground darker, grass and reed marks over it, break the seam, model the tree crowns on the dry layer, the water.
- Day 19, 22:49Day 19. Tree crowns modelled on the dry base with stipples: cool tops, dark undersides, warm crescents on right edges toward the low sun. Close up spotty, from a distance they read as foliage with volume. Water repainted in three graded piles and blended: greyer, still flat. Foreground: a glaze over dry paint barely darkened (sat on weave tops). Body pass in two noise-patched piles = camouflage again (lesson: stop using thresholded noise patches for piles). Blended it into a darker mottle, which will serve as base for individual grass and reed strokes. Plan: punt with a standing figure on the middle bend as the focal accent; reflections and bank lines in the creek; grasses; a few birds.
- Day 25, 02:18Day 25. Water v3 in five graded horizontal piles came out near-white (lead white takes over again); will restate the near water darker/bluer, keep the far bend bright as the glow reflection. An earlier blend of a dark edge band across the creek smeared it all and left lattice: never blend across dry water. Foreground: 400+ tufts of pointed rigger blades (dark and mid olive) then 90 clusters and tall reeds. Close up they read as grass; from afar the foreground is still one mid value. Plan: a real glaze (umber/black/green earth, medium ~0.55) graded darker to the bottom corners, then lit tips.
- Day 31, 04:27Day 31. Punt on the far meander (y~457) with a standing figure poling and a seated one at the bow, silhouetted against the glow reflection: the scale fits the low eye implied by the trees. A warm glow ellipse over the sun point (x~645) blended in: barely visible, and the blend smeared glow over the far land line and the figure head. Repaired both two days later. Copse repainted whole (a partial repair left a rectangle seam). Lit grass tips came out as bright yellow confetti evenly spread: glaze them down when dry.
- Day 34, 07:07Day 34. Foreground: second glaze knocked the yellow tips down to ochre; then ~900 more tufts (dark, olive, rust) into the wet glaze: now a grassy marsh. Along both creek banks, tufts leaning over the water and short dark reflection dashes: the edges are no longer ruled curves. Pale pink dashes in the near water (reflection of the pink bank overhead) and small glints. Five birds as rigger Vs above the sun point. Top of the sky deepened with a load-graded blue-grey band then blended. Value squint: sky light / meadow mid-light / foreground dark / trees dark, creek a light path in. Holds.
- Day 39, 08:13Day 39. Copse modelled with stippled under-shadow, cool tops and a warm left rim toward the sun: reads as a massed stand, less of a flat blob. Mirror view flagged the ruled meadow/foreground boundary; broke it with tall grass silhouettes against the lit meadow. Second graded blue at the top of the sky. Final crop of the punt: the poler still reads against the glow. Stopping here: letting it cure, a light varnish, done. What I would do differently: plan the foreground as dark from the start (it took four glazes to find it), and keep light accents rare from the first pass.
What it was given
All 8 items, in order
Long documents open on their own pages.
Systemthe default prompt of pi, the coding-[local account redacted] program the painter ran in · 97 lines
This is pi's default coding-assistant prompt (the painter ran as a general coding [local account redacted]).
Sent first: pi's Anthropic request template
You are Claude Code, Anthropic's official CLI for Claude.
Opening · 1 line
You are an expert coding assistant operating inside pi, a coding [local account redacted] harness. You help users by reading files, executing commands, editing code, and writing new files.
Tools, in brief · 16 lines
- bash: Execute bash commands (ls, grep, find, etc.)
- todo: Manage a task list to track multi-step progress
- bg_start: Start a genuinely asynchronous task for concurrent work or later interaction
- bg_wait: Wait for finite completion and return the latest pipe log line
- bg_status: Inspect background task status with the latest pipe log line
- bg_logs: Read full task output when a latest-line summary is insufficient
- bg_send: Send a compact text/key input string or an OS signal to a background task
- bg_kill: Terminate an unresponsive background task
- subagent: Spawn a sub-[local account redacted] in a dedicated terminal herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT call subagents_list or any other tool to 'check' status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate, assume, or summarize results after calling this tool. After spawning, either end your turn immediately, or work on other independent tasks (including spawning more subagents in parallel). The harness will wake you with the result when it is ready.
- subagent_interrupt: Send Escape to the active turn of a currently running Pi-backed subagent. The child pane, session, watcher, and running entry remain alive; this returns only a local acknowledgement and does not emit a subagent_result solely because of this request.
- subagents_list: List all available subagent definitions. Scans project-local .pi/agents/ and global [local path redacted] Project-local agents override global ones with the same name.
- subagent_resume: Resume a previous sub-[local account redacted] session in a new herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the resumed sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT poll for status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate or assume results. After resuming, either end your turn or work on other independent tasks; the harness will wake you when the result is ready. Use when a sub-[local account redacted] was cancelled or needs follow-up work.
In addition to the tools above, you may have access to other custom tools depending on the project.
Rules · 48 lines
- Use bash for file operations like ls, rg, find
- You can inspect PI_* environment variables for current model and session details.
- Use
todofor complex work with 3+ steps, when the user gives you a list of tasks, or immediately after receiving new instructions to capture requirements. Skip it for single trivial tasks and purely conversational requests. - When starting a task from the todo list, mark it in_progress BEFORE beginning work. Mark it completed IMMEDIATELY when done — never batch completions. Exactly one task in_progress at a time.
- Never mark a task completed if tests are failing, the implementation is partial, or you hit unresolved errors — keep it in_progress and create a new task for the blocker instead.
- Task status is a 4-state machine: pending → in_progress → completed, plus deleted as a tombstone. Pass activeForm (present-continuous label, e.g. 'researching existing tool') when marking in_progress.
- To change a task's status, call update with the task id and the target status, e.g. {"action":"update","id":3,"status":"completed"} or {"action":"update","id":3,"status":"in_progress","activeForm":"writing tests"}. status is the field that changes the task; an update without a mutable field (status or another) is rejected.
- Use blockedBy to express dependencies (A is blocked by B). On create, pass blockedBy as the initial set. On update, use addBlockedBy / removeBlockedBy (additive merge — do not resend the full array). Cycles are rejected.
- list hides tombstoned (deleted) tasks by default; pass includeDeleted:true to see them. Pass status to filter by a single status.
- Subject must be short and imperative (e.g. 'Research existing tool'); description is for long-form detail. activeForm is a present-continuous label shown while in_progress.
- Use bg_start only when the user explicitly requests background execution, the process must remain available for later interaction (for example, a server, watcher, or TUI), or you will perform independent useful work concurrently while it runs.
- Do not use bg_start merely because a command may be slow. If background execution was not explicitly requested and you need its result before any independent work can proceed, use the bash tool with an appropriate timeout instead of bg_start → bg_wait → bg_logs.
- Give each bg_start task a unique name; names are compared case-insensitively across all currently retained tasks.
- Use the Environment returned by bg_start and later bg_* results as the task's immutable launch location; an SSH task stays on that target and cwd even if the active workspace changes.
- Set bg_start pty=true only for terminal-aware or interactive TUI programs; keep the default pipe mode for ordinary builds and servers.
- Once bg_start is justified, compose complete bg_* workflows in one assistant response. Every bg_* id accepts a task ID or unique name, and same-task calls execute strictly in source order, not in parallel. For example, emit bg_start(name="tests") → bg_wait(id="tests") → bg_logs(id="tests") together; for an existing task, emit bg_wait → bg_logs together. Different tasks execute in parallel, and bg_status without id is independent.
- A running bg_start task survives ordinary [local account redacted] runs but session reload or shutdown terminates it. A task finishing during a run is normally retained through that run; a task that was still running when the [local account redacted] settled and then finishes while idle is normally retained through the next run.
- Use bg_wait only for finite bg_start tasks whose completion is needed. bg_wait includes the latest pipe log line when available; place bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed. Do not poll either tool.
- Use bg_wait once when completion of an already-justified finite bg_start task is required; never create a bg_start task solely so you can wait on it.
- bg_wait returns completion status plus the latest pipe log line when available. Emit bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed; do not wait for the bg_wait result before emitting bg_logs.
- A bg_wait timeout leaves the task running and still returns the latest pipe log line; a following same-response bg_logs call reads fuller output retained at that point.
- Do not use bg_wait for persistent servers or watchers, and do not immediately wait again after a timeout unless the user asks you to keep waiting.
- Do not poll bg_status after bg_start; use bg_wait once when a finite task's final status is required.
- Use bg_status only for requested task metadata, recovering a missing task reference, or diagnosing task state.
- Use bg_status without id only when the task ID or name is unknown and a retained-task list is needed.
- bg_status includes the latest pipe log line when available; use bg_logs for full or multiline pipe output and for all PTY terminal output.
- Use bg_logs when you need more than the latest pipe log line returned by bg_wait or bg_status, or when you need any PTY terminal output.
- Use bg_logs with tail=N for recent output; omit stream to use the correct default for either pipe or PTY mode.
- Do not poll with bg_logs. When fuller finite output is needed, emit bg_wait followed by bg_logs in the same assistant response; source ordering makes bg_logs run after bg_wait.
- Provide exactly one of bg_send input or signal. bg_send input is exact text; wrap every terminal key in an angle-bracket token such as <C-d>, <A-f>, <Space>, or <Up>, and escape a literal '<' as <.
- Use bg_send input for terminal keys; use bg_send signal only when an OS process signal is explicitly intended.
- For a pipe task, bg_send input=<C-d> or input=<EOF> closes stdin.
- When bg_send is followed by waiting or output inspection, emit bg_send → bg_wait → bg_logs together in one assistant response so same-task source ordering avoids extra model rounds.
- For a disconnected adapter task, bg_send input is unavailable because the local transport is gone, but bg_send signal may remain usable for cleanup.
- Use bg_kill when a background task must be terminated.
- Use bg_kill with force=true to send SIGKILL immediately; otherwise bg_kill sends SIGTERM.
- bg_kill returns termination status only. When final output is needed, emit bg_kill followed by bg_logs in the same assistant response.
- Default to a bare spawn: write the task (and, if useful, systemPrompt, tools or skills) for the job at hand. Use a named [local account redacted] only when one listed below clearly fits.
- Omit model and thinking when invoking a named [local account redacted] so its configured defaults apply. Passing either field is an explicit one-off override and takes precedence over [local account redacted] frontmatter.
- For a bare spawn, omit model and thinking to inherit the parent runtime.
- When an intentional runtime override is necessary, prefer changing thinking before changing models: minimal/low for bounded mechanical work, medium for ordinary implementation or review, and high+ for architecture, concurrency, security, or hard diagnosis.
- When overriding a subagent model, use an exact authenticated provider/model-id from the live catalog below. Do not invent aliases or fuzzy names.
- Available named subagent catalog becomes available after session start.
- Authenticated subagent model catalog becomes available after session start.
- Be concise in your responses
- Show file paths clearly when working with files
Pointers to pi's documentation · 10 lines
Pi documentation (read only when the user asks about pi itself, its SDK, extensions, themes, skills, or TUI):
- Main documentation: [local path redacted]
- Additional docs: [local path redacted]
- Examples: [local path redacted] (extensions, custom tools, SDK)
- When reading pi docs or examples, resolve docs/... under Additional docs and examples/... under Examples, not the current working directory
- When asked about: extensions (docs/extensions.md, examples/extensions/), themes (docs/themes.md), skills (docs/skills.md), prompt templates (docs/prompt-templates.md), TUI components (docs/tui.md), keybindings (docs/keybindings.md), SDK integrations (docs/sdk.md), custom providers (docs/custom-provider.md), adding models (docs/models.md), pi packages (docs/packages.md), environment variables (docs/environment-variables.md)
- When working on pi topics, read the docs and examples, and follow .md cross-references before implementing
- Always read pi .md files completely and follow links to related docs (e.g., tui.md for TUI API details)
Addendum · 12 lines
Responsive communication
When the user requests work, begin with one or two short, specific sentences acknowledging the request and stating your next action before calling tools. Do not wait until the work is complete to speak. If the request can be answered immediately, answer directly instead of adding a separate acknowledgment.
When a new user message arrives during work, address it at your next opportunity before continuing. Respect the harness's existing steering, queuing and cancellation behavior; this instruction does not authorize interrupting or restarting running operations.
Keep updates conversational and useful. Avoid flattery, stock apologies, corporate jargon, repeated acknowledgments and generic wrap-ups. State intentions as intentions, not completed actions. Do not claim a result before checking it. Preserve the user's explicit formatting and style preferences.
This is a communication preference, not a reason to skip necessary reasoning, verification or safety checks.
Working folder · 3 lines
[local path redacted]
- ToolsTools it could call · 16 tools
MessageMessage that started it · 1 line
Complete your task autonomously. Read BRIEF.md in this folder and follow it exactly. That file is your whole brief. Your FINAL message is the reply it asks for.
BriefPaint a picture · 52 lines BRIEF.md
Paint a picture
Paint one picture of your choosing in oil, at the easel of claude-paint, a simulator of oil paint on linen. Subject, composition and manner are yours. Work from what you know; don't use reference images or image models.
Your studio
- The folder [local path redacted] Work only there, and in your scratch folder.
- You paint at the easel, in one session: open it, paint a chunk, look at
the canvas, paint the next. The easel is
bin/easelin your studio; notes/easel_guide.md has its commands (open,do,look,note,save,close). - What is painted stays painted. There is no undo: paint over what you don't want.
- You mix your own paint on the palette, from the tubes, in the proportions you choose.
- Time passes on the painting's own clock: every mark takes the time a
hand takes, and
wait(minutes)lets it rest, as long as you like; paint dries as that time passes. Real time between commands doesn't count. The clock isn't a budget or a target. - Scratch: run
[local path redacted] studio-96b5e4, thenexport TMPDIR="<that folder>" TMP="<that folder>" TEMP="<that folder>"; write temporary files only there. - Wrap anything that might not finish in
timeout(a process that hangs doesn't end on its own).
The rules of the studio
- The easel is the only way to paint and to see the painting. Don't replay
or copy the session yourself, open a second one, or edit or restore its
files. (
bin/easel check, which verifies the log against the canvas, is fine.) - Look at the canvas with the easel's views. Don't read pixel values with other programs.
- Paint shapes and marks, not computed pictures: don't encode an image in masks, amounts or proportions.
What to read
notes/easel_guide.md; notes/studio_notes.md; notes/research/oil_paint_physics.md as needed.
Working
- You make every artistic decision.
- Look at your painting often, whole and close up.
- Keep a working journal with
bin/easel note "..."as you go: your own working notes. Add to it; don't rewrite earlier entries. - Develop the painting until you judge it complete. Then save it
(
bin/easel save) and close the session.
When you're done
Reply with the paths of the saved painting and its log, the painting's title if you give it one, and if you like a few sentences about the picture.
- GuideThe easel · 475 linesnotes/easel_guide.md
- Studio notesStudio notes · 304 linesnotes/studio_notes.md
- ResearchPhysics of 19th-century oil paint on canvas: sourced numbers for a simulator · 176 linesnotes/research/oil_paint_physics.md
SummarySummary it continued from after its context was compacted · 49 lines
Continuation summary
Task (from BRIEF.md in
[local path redacted]): Paint one oil painting at the claude-paint easel (bin/easel), working autonomously, and make every artistic decision myself. No reference images or image models.- Work only in the studio and in scratch
[local path redacted]. ExportTMPDIR/TMP/TEMPto scratch in each shell. Wrap commands intimeout. - Rules: the easel is the only way to paint and to see the painting. Don't replay, copy, or edit the session or log files (
bin/easel checkis fine). Don't read pixels with other programs. Paint shapes and marks, not encoded images. - Keep a journal with
bin/easel note "...", adding entries without rewriting old ones. Look often, whole and in crops. - When complete:
bin/easel save, thenbin/easel close. The final reply gives the saved painting path (out/easel/painting/painting.png), the log path (paintings/lua/painting.lua), a title if any, and optionally a few sentences about the picture.
Session state: The easel is open with 48 chunks, and the painting clock is at about day 31, 03:03. Chunk files are in scratch (c2.lua … c48.lua) and are run with
bin/easel do -f $TMPDIR/cN.lua --look. The journal has 5 entries so far (days 1, 6, 12, 19, 25).Canvas: 560 mm, aspect 1.4 (W=1000, H≈714), linen {18,15}, seed 7. Warm pinkish-ochre toned ground.
Picture: An evening marsh with a low horizon at y≈441.
- Sky: a smooth gradient from blue-gray at the top to a pale lemon glow at the horizon. Soft mauve and pink stratus: a bank upper right at y 140–200, high clouds upper left at y 30–100, a streak mid-left at y≈280. A subtle glow ellipse sits around the sun at (645, 436).
- Left tree group: four elms on trunks (x 0–440, crowns up to y≈262), modeled with stippled cool tops, dark undersides and warm right rims. Crown top streaks were painted over.
- Right copse: x 745–980, y 378–446. Freshly repainted with
t_mid2(chunk 47, still wet). It's a flat mauve-gray blob and still needs modeling once dry. - Far land: a far tree line/hills strip along the horizon (
farline), with lavender mist under the left trees. - Middle distance (y 450–530): a warm, sunlit ochre-olive meadow with a dark soft patch on the right (x 780–980, y 480–530).
- Foreground (y 530–714): dark umber-olive, glazed and blended, with many rigger grass tufts and reeds.
- Creek: winds from the horizon at x≈650 through a flat far meander (y 445–465) and bends to the bottom (x≈470–660). The far water is bright glow; the near water is light blue-gray (repainted in chunk 41, tacky at (600, 650)).
- Focal point: a small dark boat on the far meander (x 570–603, y≈456–459). A standing figure with a pole at x≈594 has its head at y≈440, and a seated figure sits at the bow (x≈577).
Globals defined:
- Masks:
sky,land,creek(a ribbon ofcreek_line, widths 1+0.5·(y−441)),marsh,fgg,treesL,treesL2,crowns,clumps,clump_und,clump_top,rimR,treesR,farline. - Piles: s1–s4, c0–c2, cb, cbh, cg, m_, g_, gr_dk, gr_mid, gr_lit, gr_lit2, t_far, t_far2, t_dark, t_base, t_under, t_top, t_rim, t_mid, t_mid2, fig, wv, wn1, wn2, gz2, glow, glow2, sk_mid, sk_low, w_refl.
- Functions:
blade(b, x, y, len, ang, bend, pr),tufts(...),tuft_at(x, y, pile, prmax, nb, scale),streak(...),cloudm(...).
Lessons learned:
- Lead white dominates mixes, so pale piles come out even paler.
- Thresholded noise patches of different piles look like camouflage or bricks. Don't use them.
- Stipples into wet paint fuse. Model on a dry layer.
- Blending near wet neighbors drags them (it smeared the figure, the far line and the copse). Never blend across dry water with a wet band.
- Blend-mask edges leave seams.
- Glazes over dry paint are weak unless medium is about 0.6.
- Painting pale over wet dark (and the reverse) lifts and streaks, so wait for paint to dry.
ribbonwidths are full widths.bone blackmixes need 3 or more days to dry.
Latest look (chunk 48): The seam tufts along y≈528 helped. The lit grass tips (
gr_lit/gr_lit2) came out as stark, scattered bright-yellow flecks that are too bright and too uniform, especially in the lower foreground. They need to be subdued, e.g. glazed or overpainted with dark tufts once dry, or partly covered by darker clusters.Outstanding tasks:
- Tame the yellow grass flecks.
- Model the right copse once dry: stippled cool tops, a warm left rim toward the sun, a few base gaps.
- Paint tall dark reeds overlapping the near creek banks against the water (after the creek dries); add dark bank lines and light rims along the creek edges; add sparse horizontal ripple lights and dark bank reflections placed by hand, with no blending.
- Optionally add middle-distance interest (small bushes or willows, fence posts), a few distant birds (rigger V marks), and strengthen a cloud or two.
- Final checks: whole view, value/squint, mirror, crops. Add journal notes.
- Wait until everything is dry, e.g.
wait(120*24*60), then optionallyvarnish{coats=0.3, vary=0.08}. bin/easel save, optionallybin/easel check, thenbin/easel close.- Reply with the paths, a title (e.g. "Evening on the Marsh" or "The Punt at Sundown"), and a few sentences.
- Work only in the studio and in scratch
Also opened on its own · 1 file
Files nothing pointed it to. Its own renders and writing are left out.
bin/easel· with cat
Notes
Painted at the easel, a passage at a time.
The video replays the painter’s strokes.
Shown in gallery light, lit from the upper left so the paint’s texture shows.
More paintings with a free subject
← → keys to browse · All paintings



