Paintings / Free subject
Five apples, red and green, grouped on a pale cloth against a dark brown wall lit softly from the upper left.

368 minutes of painting, sped up.

Journal

First, middle and last entries.

  1. Day 1, 09:00Canvas: 80x64cm, 1000x800 units, warm lead-white/umber ground knife-laid then brushed over. Subject decided: a still life — a shallow earthenware bowl of apples with two apples on a white cloth, on a dark table against a dark wall, one light from the upper left.
  2. Day 31, 15:30Back at the easel, day 31, everything dry. Looked at it whole and at 1:1 and I do not agree with my last entry: it is not done. The apples read as flat cut-out stickers of poster vermilion and lime green with a hard cut edge and a dotted spatter fringe; the stems are bright white shards; the rim of the bowl has white hairline streaks; and the wall is a leopard-spot mottle of…
  3. Day 39, 18:39day 36+, repaint under way. Ground, wall and table laid: one soft light from the upper left, no spots, the darks knocked back with three crossing passes of the near-black at coverage 5 (a single pass left the old vermilion ghosting through - coverage really is not opacity). Cloth laid and modelled: mid tone first opaque, then the light as ONE soft pool that fades out rather…
Read all 14 entries

Times are on the painting's own clock, which runs only while the painter paints or waits for paint to dry.

  1. Day 1, 09:00Canvas: 80x64cm, 1000x800 units, warm lead-white/umber ground knife-laid then brushed over. Subject decided: a still life — a shallow earthenware bowl of apples with two apples on a white cloth, on a dark table against a dark wall, one light from the upper left.
  2. Day 1, 11:30Background: dark warm ground, knocked back twice; the warm ground glows through the darks. Light pool upper-left. Lesson: fill=true makes leopard spots; light pools need a much lighter pile and a load that falls off, not a hard mask.
  3. Day 1, 13:27Composition was too small and the cloth read as a white blob. Repainting the group larger and lower-left: bowl at (600,560) r200, apples in and in front of it, cloth running off the bottom edge. Resetting the table to the dark ground first.
  4. Day 2, 03:54Painting apples: the sims blend and the mask edges leave streaks; clip=true keeps edges clean, and hand="glaze" drags pale streaks — use hand="body" for modelling. Palette is only 16 piles, so I am keeping a deliberate list: p_dark, p_white, p_clothmid, p_csh2, p_bowls, p_tab, p_rb2/p_rl2/p_rs2 (red), p_gb2/p_gl2/p_gs2 (green), p_hi, p_refr/p_refr2, p_bowl2.
  5. Day 9, 07:08Background nearly lost twice by glazing it with a pile that is lighter than I judged (p_csh3, p_bowls are mid-browns, not darks). p_rs2 is the only near-black on the palette. Dark is now p_rs2 / p_gs2; mid warm brown p_bowls; cloth grey p_csh2/p_csh3.
  6. Day 29, 15:18Final passes: fruit repainted cleanly one last time (a warm veil over tacky paint had left dashes), highlights and stems restored, bowl rim light picked out. Painting time is now day 29.
  7. Day 31, 15:30Done. Title: "Apples in an Earthenware Bowl". Dark ground, single light from the upper left, a shallow ochre bowl with three apples, two more on a pale cloth in front. Day 31 of the painting clock; the fruit is touch-dry, the cloth dry.
  8. Day 31, 15:30Back at the easel, day 31, everything dry. Looked at it whole and at 1:1 and I do not agree with my last entry: it is not done. The apples read as flat cut-out stickers of poster vermilion and lime green with a hard cut edge and a dotted spatter fringe; the stems are bright white shards; the rim of the bowl has white hairline streaks; and the wall is a leopard-spot mottle of soft brown blobs on near-black that fights the still life. The cloth is a flat pale slab with a repetitive dash texture. All dry, so from here everything is painted over. Plan: knock the wall back to a quiet dark and re-lay one soft light from the upper left, then repaint the five apples with real modelling (core shadow, terminator, reflected light, found/lost edges), then the bowl, then the stems, then the cloth.
  9. Day 31, 23:49Day 31, later. Mistake worth writing down: I laid an occlusion shadow round the still life with work(... edge="lost") and it ran the film right across the whole canvas and blacked out the bowl, the cloth and four of the five apples. The mask was right (I checked it afterwards: a 34k-unit ring, zero over the cloth). It was the edge setting — "lost" throws the paint a very long way past the line and dissolves it, and a near-black pile at coverage 1.3 was enough to cover everything. edge="lost" is not a way to soften a passage; use "soft" or "firm", and keep "lost" for small detail strokes. Nothing to undo but paint, so the still life and the cloth get repainted from the dark ground up, which they needed anyway.
  10. Day 33, 19:38Day 33, 19:40: Finished. Title: "Apples in an Earthenware Bowl". What I did after finding the day-31 painting flat and poster-like: knocked the leopard-spotted wall back to a quiet dark warm brown and fused it, laid one soft light from the upper left; threw out the old oval cloth and laid a new one running off the bottom and left edges, with a fan of folds; repainted the bowl and all five apples from the ground up, each with a solid lay-in, three soft steps of core shadow, a warm light, a reflected light off the cloth and a stem, then one light blend; laid the cast shadows on the cloth. Finished at day 33.

    Studio notes from this campaign, for next time:
    - coverage= as a function is NOT supported in this build (it errors "converting Lua function to f32"). Gradients have to be built from stacked soft masks at different coverages, or from stipple.
    - work() with a hard-edged rect/glow mask leaves a visible rectangle. Always feather well outside the damaged area.
    - An option table with only string keys has no array part, so table.unpack(t) returns NOTHING and every option is silently dropped. Write the options out, or keep an array part.
    - raw umber is a LIGHT earth. A "dark" pile of raw umber + lead white is mid-value; you need bone black in it to get a dark.
    - Big passes get starved: a filbert 20 with 40-110 unit strokes at coverage 2.4 over 250k units lays a thin veil. filbert 12, length 24-64, dips={4,1.0,0.1} and fill=true gives a solid coat.
    - Stipple is the right tool for soft tone: a dark pile over a lighter passage lays smooth and pattern-free. A pile much LIGHTER than what is under it reads as orange spray. Same lesson as the fill=true leopard spots.
    - blend(m) leaves a hard disc if the mask is a shrunk copy of the shape - use (m:shrink(3)):soften(3).
    - blend() over a lean layer lifts the lead-white ground through in pale blobs. It needs a thick opaque base under it first, and even then only twice.
    - Never blend a whole group of touching objects: it drags one fruit's colour onto the next.
    - Surgical fix-ups with masks that cross other objects do more harm than the flaw. Repaint the object instead.
  11. Day 33, 19:38day 33+, back at the easel. Picked the painting up and looked at it whole and at 1:1, and I disagree with my "finished" note of day 33. What is actually wrong: the five apples are flat vermilion and lime discs with a hard cut edge and a ring of dirty stipple dots round each silhouette — no core shadow, no terminator, no reflected light, no cast shadow, no stems; the cloth is a pale slab with a scribbly texture; the bowl is a flat ochre ellipse; the wall is a blobby mottle. Nothing in it is modelled. So this is not a fix-up job, it is a repaint. Plan: knock the whole field back to one quiet dark warm ground with a single soft light from the upper left, lay a table plane and a new cloth with real folds, then the bowl, then the five apples each with lay-in / core shadow / terminator / reflected light, then the cast shadows. Lessons carried from day 31-33: never edge="lost" on a big passage, no clip=true on a fruit edge, blend each object separately and at most twice over an opaque base, and no ring-shaped shadow stipple at an object edge (that is the dirty halo I keep getting).
  12. Day 36, 21:56day 36, 22:00. Repainted the whole picture from the dark ground up and this time I judge it finished: a shallow earthenware bowl with three apples (two red, one green), a red and a green apple in front on a white cloth, a dark warm wall, one soft light from the upper left. Title: "Apples in an Earthenware Bowl".

    What the repainting taught me, all of it the hard way:
    - COVERAGE IS NOT OPACITY. A pass at coverage 2-3 is a veil. To bury a strong old colour (saturated vermilion) I had to go to coverage 8-10 in two passes. The same pile over a pale cloth comes out much lighter and more saturated than the same pile over a dark ground, because the film is thin - so a pile has to be mixed against the ground it will sit on, not judged on the palette.
    - The recipe that works for a solid coat: hand="broad" (or a big filbert), coverage 3-4.5, fill=true, pressure 1, dips={1,1.0,0.0} so every stroke gets a full load. With dips={3,...} the load runs out along the stroke and I get starved streaks. Then ONE blend over the opaque coat to fuse the strokes, and no more blending after that.
    - THIN FILMS BLOOM. Any small, thin or low-coverage application of a lead-white or vermilion pile over a dark ground glows like a lamp - I made three separate glowing highlights and had to paint them out. For a highlight on a dark form either lay the fruit's own light colour more thickly, or use a lead-white-free earth. fill=true over a small mask beads the paint into cottage cheese; a single touch is the only clean way to lay a small light spot.
    - A sphere reads from lay-in, terminator, core shadow and a quiet reflected light. It does not need a specular highlight, and it certainly does not need a hard edge-light along the silhouette - that read as a drawn outline and had to be painted out.
    - Colour: raw umber is a LIGHT earth, so "umber + black" is still mid-value, and yellow ochre + red earth is a pumpkin, not earthenware. Earthenware wants raw umber + red earth + a little lead white and nothing bright.
    - Paint order matters absolutely. I laid cloth passes that painted straight over the fruit and the bowl and had to repaint the group. All cloth work now goes through free = cloth - bowl - fruit, and the fruit are painted last.
    - below(600) is an error - below() wants a curve or a point list, not a number. That one cost me three failed chunks.
    - A contact shadow must be a pool just under the object and offset away from the light, not a ring around its base; a ring reads as dirt. Same for a ring-shaped highlight.
    - Long thin accent strokes (a filbert 6 with an explicit stroke and clip) are the one thing that stays crisp - I finished with fold lines on the cloth and a thin light on the bowl's rim laid that way.
    - A glaze of a warm dark over the group and a cool dark over the room tied the whole picture together and gave the darks their depth.
  13. Day 37, 03:56day 36+, back at the easel again. Looked at the day-36 picture whole and at 1:1 and I am not carrying on with it: the red fruit is a flat orange disc with a hard cut edge, the green fruit is a neon lime, the cloth shadows are black ink scribbles, the cast shadow is a row of dashes, the bowl is a flat ochre mass, the wall is a leopard mottle. None of it is modelled. This is the last full repaint; I am writing the plan down first this time so the work is deliberate.

    The plan, in order, and each stage before the next is painted over it:
    1. Knock the whole canvas back to one quiet dark warm ground, opaque, fused.
    2. Wall and table. One soft light from the upper left. No spots.
    3. Cloth: a big shape with a back edge running across, folds drawn as shapes, warm off-white in the light and cool grey in the fold shadows, and the light falling off to the right.
    4. Bowl: rim ellipse and body, raw umber + red earth, matte, never orange.
    5. The five apples, painted last and painted one at a time, each as a value ladder: lay-in, then mid, then lit, each pass opaque OVER the one under it so nothing thin ever sits on the dark. Core shadow, a quiet reflected light off the cloth, a small opaque highlight. No hard edge anywhere on a fruit.
    6. Cast shadows as soft pools offset away from the light, never rings and never dashes.
    7. A warm glaze over the group, a cool glaze in the room, and crisp thin accents last.

    What I will not do again: no vermilion+lime poster colour, no stipple halo round a silhouette, no edge="lost" on a big passage, no blending a whole group of touching fruit, no thin lead-white over a dark ground.
  14. Day 39, 18:39day 36+, repaint under way. Ground, wall and table laid: one soft light from the upper left, no spots, the darks knocked back with three crossing passes of the near-black at coverage 5 (a single pass left the old vermilion ghosting through - coverage really is not opacity). Cloth laid and modelled: mid tone first opaque, then the light as ONE soft pool that fades out rather than a boolean cut (a boolean left a dead-straight vertical edge in the cloth and had to be painted out), then fold troughs in body paint with one blend over the top - thin glazes of the folds did not survive the blend, they came out as rain. Broad soft diagonal folds read as cloth; narrow ones never will.

    Two things to remember: hand="broad" with fill=true leaves a lozenge/scale texture, and the ONLY thing that fixes it is one blend over the coat. And a glaze over a big soft mask leaves visible parallel streaks, so a glaze is not a substitute for body paint when I want a shape to survive.

What it was given

All 15 items, in order

Long documents open on their own pages.

  1. Systemthe painter harness's prompt (sitting 1) · 8 lines

    This is the painter harness's own system prompt (harness/painter/system_prompt.md, plus the working folder).

    Opening · 4 lines

    You are a painter working at an easel in your studio. The studio is the folder you are in. You work in it through a shell (the bash tool) and by reading files and images (the read tool).

    Your brief follows in the first message.

    Working folder · 3 lines

    [local path redacted]

  2. ToolsTools it could call (sitting 1) · 2 tools
  3. MessageMessage that started it (sitting 1) · 1 line

    Complete your task autonomously. Read BRIEF.md in this folder and follow it exactly. That file is your whole brief. Your FINAL message is the reply it asks for.

  4. BriefPaint a picture · 56 lines BRIEF.md

    Paint a picture

    Paint one picture of your choosing in oil, at the easel of claude-paint, a simulator of oil paint on linen. Subject, composition and manner are yours. Work from what you know; don't use reference images or image models.

    Your studio

    • The folder [local path redacted] Work only there, and in your scratch folder.
    • You paint at the easel, in one session: open it, paint a chunk, look at the canvas, paint the next. The easel is bin/easel in your studio; notes/easel_guide.md has its commands (open, do, look, note, save, close).
    • What is painted stays painted. There is no undo: paint over what you don't want.
    • You mix your own paint on the palette, from the tubes, in the proportions you choose.
    • Time passes on the painting's own clock: every mark takes the time a hand takes, and wait(minutes) lets it rest, as long as you like; paint dries as that time passes. Real time between commands doesn't count. The clock isn't a budget or a target.
    • Scratch: run [local path redacted] studio-520026, then export TMPDIR="<that folder>" TMP="<that folder>" TEMP="<that folder>"; write temporary files only there.
    • Wrap anything that might not finish in timeout (a process that hangs doesn't end on its own).

    The rules of the studio

    • The easel is the only way to paint and to see the painting. Don't replay or copy the session yourself, open a second one, or edit or restore its files. (bin/easel check, which verifies the log against the canvas, is fine.)
    • Look at the canvas with the easel's views. Don't read pixel values with other programs.
    • Paint shapes and marks, not computed pictures: don't encode an image in masks, amounts or proportions.
    • Shapes are drawn, not copied: don't make a mask or stroke by reflecting, flipping, rotating or translating another mask's or stroke's coordinates. A reflection in water is painted as its own shape, not as mask:at(x, 2*h - y).

    What to read

    notes/easel_guide.md; notes/studio_notes.md; notes/research/oil_paint_physics.md as needed.

    Working

    • You make every artistic decision.
    • Look at your painting often, whole and close up.
    • Keep a working journal with bin/easel note "..." as you go: your own working notes. Add to it; don't rewrite earlier entries.
    • Develop the painting until you judge it complete. Then save it (bin/easel save) and close the session.

    When you're done

    Reply with the paths of the saved painting and its log, the painting's title if you give it one, and if you like a few sentences about the picture.

  5. GuideThe easel · 459 linesnotes/easel_guide.md
  6. Studio notesStudio notes · 175 linesnotes/studio_notes.md
  7. ResearchPhysics of 19th-century oil paint on canvas: sourced numbers for a simulator · 176 linesnotes/research/oil_paint_physics.md · it read lines 1–120
  8. System prompt (sitting 2): Same system prompt as in sitting 1 and the same tools.
  9. MessageMessage that started this sitting (sitting 2) · 1 line

    You're back in your studio. The painting is on the easel as you left it: bin/easel open picks it up where you stopped. Your brief is in BRIEF.md and your journal in notes/journal.md. Your FINAL message is the reply the brief asks for.

  10. System prompt (sitting 3): Same system prompt as in sitting 1 and the same tools.
  11. MessageMessage that started this sitting (sitting 3) · 1 line

    You're back in your studio. The painting is on the easel as you left it: bin/easel open picks it up where you stopped. Your brief is in BRIEF.md and your journal in notes/journal.md. Your FINAL message is the reply the brief asks for.

  12. System prompt (sitting 4): Same system prompt as in sitting 1 and the same tools.
  13. MessageMessage that started this sitting (sitting 4) · 1 line

    You're back in your studio. The painting is on the easel as you left it: bin/easel open picks it up where you stopped. Your brief is in BRIEF.md and your journal in notes/journal.md. Your FINAL message is the reply the brief asks for.

  14. System prompt (sitting 5): Same system prompt as in sitting 1 and the same tools.
  15. MessageMessage that started this sitting (sitting 5) · 1 line

    You're back in your studio. The painting is on the easel as you left it: bin/easel open picks it up where you stopped. Your brief is in BRIEF.md and your journal in notes/journal.md. Your FINAL message is the reply the brief asks for.

Also opened on its own · 1 file

Files nothing pointed it to. Its own renders and writing are left out.

  • paintings/lua/painting.lua · with sed

Notes

Painted at the easel, a passage at a time.

The video shows saved views of the picture, not every stroke.

Shown in gallery light, lit from the upper left so the paint’s texture shows.

More paintings with a free subject

← → keys to browse · All paintings