Paintings / After Friedrich
A low-horizon summer evening after sunset: an old stag-headed oak on the left and two figures seen from behind on the near bank, looking over hay cocks, pollard willows and a winding river with a sailing barge toward a misty town with a spire, under a thin new moon.

53 minutes of painting, sped up.

Journal

First, middle and last entries.

  1. Day 1, 09:00Plan: "Summer Evening on the Elbe Meadows". 71x50 cm, fine linen, red-ochre knifed ground under a brushed lead-white/ochre top. Low horizon ~y440. Sky after sunset: lemon/peach glow at the horizon rising through pale green to smalt/cobalt at the top, thin strata of violet cloud low, a waxing crescent moon upper right. Flat meadows with sky-reflecting pools, far blue hills, a…
  2. Day 20, 03:50Added: row of pollard willows along a ditch running from the bank on the right back to the river bend (first attempts were lollipops; fixed with upward-fanning shoots and leaf clusters at their tips); an Elbe barge with a tall mast and a backlit sail on the near reach, with its reflection; two figures seen from behind on the bank, a man in a dark coat and beret with a stick, a…
  3. Day 43, 17:02Finishing: the lower trunk is restated with the same barkD/barkDark recipe as the band above, so the column is continuous from crown to roots, with a warm rim on the glow side and new grass across its foot. Warm light worked softly into the strata. The boulder calmed (it had marks like an inscription) and given a shadowed facet, a crack and taller grass in front. Final look,…
Read all 11 entries

Times are on the painting's own clock, which runs only while the painter paints or waits for paint to dry.

  1. Day 1, 09:00Plan: "Summer Evening on the Elbe Meadows". 71x50 cm, fine linen, red-ochre knifed ground under a brushed lead-white/ochre top. Low horizon ~y440. Sky after sunset: lemon/peach glow at the horizon rising through pale green to smalt/cobalt at the top, thin strata of violet cloud low, a waxing crescent moon upper right. Flat meadows with sky-reflecting pools, far blue hills, a small town with church towers right of centre. A stag-headed oak left of centre (dead limbs above a living crown), dark against the glow. Dark foreground bank with grasses, a path; two small figures seen from behind at right of centre looking into the glow. Method after Friedrich: graphite drawing, very thin lay-in, thin layers, stippled gradations, details last.
  2. Day 2, 08:33Sky laid in thinly in bands (smalt/cobalt+white at top, pale smalt, a greenish white, chrome-yellow/vermilion glow at the horizon), blended wet with the badger in several passes. Bands still a bit stepped; will correct later by stippling over the dry lay-in, as he did. Letting it set overnight before the land.
  3. Day 6, 09:42Oak built: trunk and boughs as spline ribbons, gnarled with noise; secondary branches grown by hand-seeded crooked recursion; dead stag-horn leader and two dead side limbs left bare above the crown. Foliage stippled into clumps (branch tips + hand-placed masses) - reads too green and scalloped, needs warmer darker olive, sky holes, lighter rims. Distance: far tree lines, town with a tall spire and a second tower, poplars, all violet-grey in the glow - good. Foreground went wrong: bands of warm/cool with a straight seam, then blending with rect masks left more seams, smeared the root flare and dissolved the path. Lesson: no rect-edged blends over body passages. Letting it dry to repaint the bank opaquely.
  4. Day 14, 15:43Sky: stippled smalt/cobalt over the dry lay-in to even the zenith, fused with a badger; a band of fine dots remains in the transition - I keep it, it is the texture of his skies. Thin evening strata near the glow, dragged soft with the blender. Young crescent moon upper right, lit toward the sunken sun. River got dark reedy far banks and faint violet reflections. Mistake: meadow "mown strips" with a filbert 5 unclipped - crude contrasty strokes across trunk, river and bank. Blended the meadow hard while open; it now reads as a smooth, broadly modelled field. To repair after drying: trunk, far river reach, bank crest.
  5. Day 16, 18:45Meadow: tried a finishing layer of short hatch touches - came out as cobbles with hard-edged noise islands. Blended it with long ruler-straight horizontal badger passes while open: now a smooth horizontal field with soft darker hollows, which is closer to how he treats a plain at this distance: smooth gradation, with interest carried by particular things (willows, hay, figures), not texture.
  6. Day 20, 03:50Added: row of pollard willows along a ditch running from the bank on the right back to the river bend (first attempts were lollipops; fixed with upward-fanning shoots and leaf clusters at their tips); an Elbe barge with a tall mast and a backlit sail on the near reach, with its reflection; two figures seen from behind on the bank, a man in a dark coat and beret with a stick, a woman in a red-brown dress and a pale shawl with her hand on his arm. The shawl picked up red from the wet dress; to restate. Next: foreground (grasses, crest, plants, a boulder), mist over the meadow, trunk glaze.
  7. Day 23, 11:26Sky: close up the upper sky was peppered with dark specks from an old stipple pass. Repainted the band y0-240 around the tree in overlapping horizontal bands (smalt/cobalt/lead white deep at top to pale smalt with a trace of chrome yellow below) and blended it long and level: it is glassy now, much closer to his skies. First try with the old skyTop mix was too white, and the rect test left a seam - repainted everything wet. Trunk: restated as one continuous dark column with a warm rim on the glow side and some long fissures. Mistakes: my rim pass traced the cut edges of the rect and foliage holes (fixed), and repairing the left crown clump made it a dark beaded ring. Stipple onto wet dark paint vanishes into it - waiting for it to dry before the leafy light touches go on.
  8. Day 26, 16:18Details added: the evening star by the moon; a small skein of rooks against the glow; hay cocks on the meadow with small shadows toward us; crest grasses standing against the meadow; the woman restated with a clean shawl, the man with a proper coat hem, trousers and boots. A blue glaze over the upper right sky went on as visible streaks - blended it at once in long level passes, and it is now a deeper zenith that gives the moon a little more contrast. First thistles were a failure (grey balls for heads, blue squiggles for leaves): painted them out wet with bank colour. A boulder (granite, backlit) started - too light, to glaze down when dry. Waiting two days.
  9. Day 31, 01:12Evening mist: a thin lead-white glaze along the horizon band, blended level. The first half spilled past its rect (glaze brush is 26 units wide - must clip) and whitened the trunk and the hanging clump; repaired the trunk wet, then carried the mist across the whole width with clip=true so it is continuous. Foreground: dense fine blades in three olive/umber/straw piles over the dark bank, a granite boulder lower right (dark backlit face, lichen on top, grass over its foot), river glints and ripples, sail reflection. To do when dry: dark unifying glaze over the lowest foreground, cover the halo below the hanging clump, thistles again (properly), grass at the oak foot.
  10. Day 34, 15:04Foot of the oak: dense grass and dock leaves round the roots; tried to smooth the step between trunk and roots, and learned that the clean badger lifts wet dark paint back toward the lighter layers beneath - each blend over the trunk lightened it. Lower trunk now too light and flat with a step at y478: glaze it dark when dry, no more blending on darks. Thistles, second attempt: filled jagged leaf shapes with pale edges, dark bract heads with small mauve tufts, plus tall grass stalks with drooping seed heads against the meadow at the left edge. They also cover the ghost of the first attempt.
  11. Day 43, 17:02Finishing: the lower trunk is restated with the same barkD/barkDark recipe as the band above, so the column is continuous from crown to roots, with a warm rim on the glow side and new grass across its foot. Warm light worked softly into the strata. The boulder calmed (it had marks like an inscription) and given a shadowed facet, a crack and taller grass in front. Final look, whole and close: glassy sky from zenith blue to lemon at the horizon, a new moon and the evening star, the old stag-headed oak on the left, two figures from behind on the bank looking out over the Elbe meadows, the pollard willows along the ditch, hay cocks, a barge on the river and the town beyond in the mist. Weak spots I leave: stippled crown edges, a faint ghost below the hanging clump, the foreground blades a little busy. Saving without varnish - some passages are still wet.

What it was given

All 9 items, in order

Long documents open on their own pages.

  1. Systemthe default prompt of pi, the coding-[local account redacted] program the painter ran in · 97 lines

    This is pi's default coding-assistant prompt (the painter ran as a general coding [local account redacted]).

    Sent first: pi's Anthropic request template

    You are Claude Code, Anthropic's official CLI for Claude.

    Opening · 1 line

    You are an expert coding assistant operating inside pi, a coding [local account redacted] harness. You help users by reading files, executing commands, editing code, and writing new files.

    Tools, in brief · 16 lines
    • bash: Execute bash commands (ls, grep, find, etc.)
    • todo: Manage a task list to track multi-step progress
    • bg_start: Start a genuinely asynchronous task for concurrent work or later interaction
    • bg_wait: Wait for finite completion and return the latest pipe log line
    • bg_status: Inspect background task status with the latest pipe log line
    • bg_logs: Read full task output when a latest-line summary is insufficient
    • bg_send: Send a compact text/key input string or an OS signal to a background task
    • bg_kill: Terminate an unresponsive background task
    • subagent: Spawn a sub-[local account redacted] in a dedicated terminal herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT call subagents_list or any other tool to 'check' status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate, assume, or summarize results after calling this tool. After spawning, either end your turn immediately, or work on other independent tasks (including spawning more subagents in parallel). The harness will wake you with the result when it is ready.
    • subagent_interrupt: Send Escape to the active turn of a currently running Pi-backed subagent. The child pane, session, watcher, and running entry remain alive; this returns only a local acknowledgement and does not emit a subagent_result solely because of this request.
    • subagents_list: List all available subagent definitions. Scans project-local .pi/agents/ and global [local path redacted] Project-local agents override global ones with the same name.
    • subagent_resume: Resume a previous sub-[local account redacted] session in a new herdr pane. For Pi-backed OpenAI or OpenAI-Codex subagents, set fast: true to opt into service_tier: "priority" (fast mode). Omit fast or set it to false to force the standard service_tier: "default". This is a fire-and-forget async tool: the call returns immediately with only an acknowledgement. When the resumed sub-[local account redacted] finishes, the harness AUTOMATICALLY delivers its result as a steer message that wakes you up and starts a new turn — you do not need to do anything to receive it. DO NOT write polling loops, sleep/wait commands, tail/watch scripts, or repeatedly read session/log files to detect completion. DO NOT poll for status. All of that is wasted work — the harness handles delivery for you. DO NOT fabricate or assume results. After resuming, either end your turn or work on other independent tasks; the harness will wake you when the result is ready. Use when a sub-[local account redacted] was cancelled or needs follow-up work.

    In addition to the tools above, you may have access to other custom tools depending on the project.

    Rules · 48 lines
    • Use bash for file operations like ls, rg, find
    • You can inspect PI_* environment variables for current model and session details.
    • Use todo for complex work with 3+ steps, when the user gives you a list of tasks, or immediately after receiving new instructions to capture requirements. Skip it for single trivial tasks and purely conversational requests.
    • When starting a task from the todo list, mark it in_progress BEFORE beginning work. Mark it completed IMMEDIATELY when done — never batch completions. Exactly one task in_progress at a time.
    • Never mark a task completed if tests are failing, the implementation is partial, or you hit unresolved errors — keep it in_progress and create a new task for the blocker instead.
    • Task status is a 4-state machine: pending → in_progress → completed, plus deleted as a tombstone. Pass activeForm (present-continuous label, e.g. 'researching existing tool') when marking in_progress.
    • To change a task's status, call update with the task id and the target status, e.g. {"action":"update","id":3,"status":"completed"} or {"action":"update","id":3,"status":"in_progress","activeForm":"writing tests"}. status is the field that changes the task; an update without a mutable field (status or another) is rejected.
    • Use blockedBy to express dependencies (A is blocked by B). On create, pass blockedBy as the initial set. On update, use addBlockedBy / removeBlockedBy (additive merge — do not resend the full array). Cycles are rejected.
    • list hides tombstoned (deleted) tasks by default; pass includeDeleted:true to see them. Pass status to filter by a single status.
    • Subject must be short and imperative (e.g. 'Research existing tool'); description is for long-form detail. activeForm is a present-continuous label shown while in_progress.
    • Use bg_start only when the user explicitly requests background execution, the process must remain available for later interaction (for example, a server, watcher, or TUI), or you will perform independent useful work concurrently while it runs.
    • Do not use bg_start merely because a command may be slow. If background execution was not explicitly requested and you need its result before any independent work can proceed, use the bash tool with an appropriate timeout instead of bg_start → bg_wait → bg_logs.
    • Give each bg_start task a unique name; names are compared case-insensitively across all currently retained tasks.
    • Use the Environment returned by bg_start and later bg_* results as the task's immutable launch location; an SSH task stays on that target and cwd even if the active workspace changes.
    • Set bg_start pty=true only for terminal-aware or interactive TUI programs; keep the default pipe mode for ordinary builds and servers.
    • Once bg_start is justified, compose complete bg_* workflows in one assistant response. Every bg_* id accepts a task ID or unique name, and same-task calls execute strictly in source order, not in parallel. For example, emit bg_start(name="tests") → bg_wait(id="tests") → bg_logs(id="tests") together; for an existing task, emit bg_wait → bg_logs together. Different tasks execute in parallel, and bg_status without id is independent.
    • A running bg_start task survives ordinary [local account redacted] runs but session reload or shutdown terminates it. A task finishing during a run is normally retained through that run; a task that was still running when the [local account redacted] settled and then finishes while idle is normally retained through the next run.
    • Use bg_wait only for finite bg_start tasks whose completion is needed. bg_wait includes the latest pipe log line when available; place bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed. Do not poll either tool.
    • Use bg_wait once when completion of an already-justified finite bg_start task is required; never create a bg_start task solely so you can wait on it.
    • bg_wait returns completion status plus the latest pipe log line when available. Emit bg_logs immediately after bg_wait only when full or multiline pipe output or PTY terminal output is needed; do not wait for the bg_wait result before emitting bg_logs.
    • A bg_wait timeout leaves the task running and still returns the latest pipe log line; a following same-response bg_logs call reads fuller output retained at that point.
    • Do not use bg_wait for persistent servers or watchers, and do not immediately wait again after a timeout unless the user asks you to keep waiting.
    • Do not poll bg_status after bg_start; use bg_wait once when a finite task's final status is required.
    • Use bg_status only for requested task metadata, recovering a missing task reference, or diagnosing task state.
    • Use bg_status without id only when the task ID or name is unknown and a retained-task list is needed.
    • bg_status includes the latest pipe log line when available; use bg_logs for full or multiline pipe output and for all PTY terminal output.
    • Use bg_logs when you need more than the latest pipe log line returned by bg_wait or bg_status, or when you need any PTY terminal output.
    • Use bg_logs with tail=N for recent output; omit stream to use the correct default for either pipe or PTY mode.
    • Do not poll with bg_logs. When fuller finite output is needed, emit bg_wait followed by bg_logs in the same assistant response; source ordering makes bg_logs run after bg_wait.
    • Provide exactly one of bg_send input or signal. bg_send input is exact text; wrap every terminal key in an angle-bracket token such as <C-d>, <A-f>, <Space>, or <Up>, and escape a literal '<' as <.
    • Use bg_send input for terminal keys; use bg_send signal only when an OS process signal is explicitly intended.
    • For a pipe task, bg_send input=<C-d> or input=<EOF> closes stdin.
    • When bg_send is followed by waiting or output inspection, emit bg_send → bg_wait → bg_logs together in one assistant response so same-task source ordering avoids extra model rounds.
    • For a disconnected adapter task, bg_send input is unavailable because the local transport is gone, but bg_send signal may remain usable for cleanup.
    • Use bg_kill when a background task must be terminated.
    • Use bg_kill with force=true to send SIGKILL immediately; otherwise bg_kill sends SIGTERM.
    • bg_kill returns termination status only. When final output is needed, emit bg_kill followed by bg_logs in the same assistant response.
    • Default to a bare spawn: write the task (and, if useful, systemPrompt, tools or skills) for the job at hand. Use a named [local account redacted] only when one listed below clearly fits.
    • Omit model and thinking when invoking a named [local account redacted] so its configured defaults apply. Passing either field is an explicit one-off override and takes precedence over [local account redacted] frontmatter.
    • For a bare spawn, omit model and thinking to inherit the parent runtime.
    • When an intentional runtime override is necessary, prefer changing thinking before changing models: minimal/low for bounded mechanical work, medium for ordinary implementation or review, and high+ for architecture, concurrency, security, or hard diagnosis.
    • When overriding a subagent model, use an exact authenticated provider/model-id from the live catalog below. Do not invent aliases or fuzzy names.
    • Available named subagent catalog becomes available after session start.
    • Authenticated subagent model catalog becomes available after session start.
    • Be concise in your responses
    • Show file paths clearly when working with files
    Pointers to pi's documentation · 10 lines

    Pi documentation (read only when the user asks about pi itself, its SDK, extensions, themes, skills, or TUI):

    • Main documentation: [local path redacted]
    • Additional docs: [local path redacted]
    • Examples: [local path redacted] (extensions, custom tools, SDK)
    • When reading pi docs or examples, resolve docs/... under Additional docs and examples/... under Examples, not the current working directory
    • When asked about: extensions (docs/extensions.md, examples/extensions/), themes (docs/themes.md), skills (docs/skills.md), prompt templates (docs/prompt-templates.md), TUI components (docs/tui.md), keybindings (docs/keybindings.md), SDK integrations (docs/sdk.md), custom providers (docs/custom-provider.md), adding models (docs/models.md), pi packages (docs/packages.md), environment variables (docs/environment-variables.md)
    • When working on pi topics, read the docs and examples, and follow .md cross-references before implementing
    • Always read pi .md files completely and follow links to related docs (e.g., tui.md for TUI API details)
    Addendum · 12 lines

    Responsive communication

    When the user requests work, begin with one or two short, specific sentences acknowledging the request and stating your next action before calling tools. Do not wait until the work is complete to speak. If the request can be answered immediately, answer directly instead of adding a separate acknowledgment.

    When a new user message arrives during work, address it at your next opportunity before continuing. Respect the harness's existing steering, queuing and cancellation behavior; this instruction does not authorize interrupting or restarting running operations.

    Keep updates conversational and useful. Avoid flattery, stock apologies, corporate jargon, repeated acknowledgments and generic wrap-ups. State intentions as intentions, not completed actions. Do not claim a result before checking it. Preserve the user's explicit formatting and style preferences.

    This is a communication preference, not a reason to skip necessary reasoning, verification or safety checks.

    Working folder · 3 lines

    [local path redacted]

  2. ToolsTools it could call · 16 tools
  3. MessageMessage that started it · 1 line

    Complete your task autonomously. Read BRIEF.md in this folder and follow it exactly. That file is your whole brief. Your FINAL message is the reply it asks for.

  4. BriefPaint a picture · 58 lines BRIEF.md

    Paint a picture

    Compose and paint one original summer landscape in the manner of Caspar David Friedrich, at the easel of claude-paint, a simulator of oil paint on linen. The subject, hour and composition within the summer are yours. Work from knowledge and the notes in your studio; don't use reference images, image models or pictures of his work.

    Your studio

    • The folder [local path redacted] Work only there, and in your scratch folder.
    • You paint at the easel, in one session: open it, paint a chunk, look at the canvas, paint the next. The easel is bin/easel in your studio; notes/easel_guide.md has its commands (open, do, look, note, save, close).
    • What is painted stays painted. There is no undo: paint over what you don't want.
    • You mix your own paint on the palette, from the tubes, in the proportions you choose.
    • Time passes on the painting's own clock: every mark takes the time a hand takes, and wait(minutes) lets it rest, as long as you like; paint dries as that time passes. Real time between commands doesn't count. The clock isn't a budget or a target.
    • Scratch: run [local path redacted] studio-cd267e, then export TMPDIR="<that folder>" TMP="<that folder>" TEMP="<that folder>"; write temporary files only there.
    • Wrap anything that might not finish in timeout (a process that hangs doesn't end on its own).

    The rules of the studio

    • The easel is the only way to paint and to see the painting. Don't replay or copy the session yourself, open a second one, or edit or restore its files. (bin/easel check, which verifies the log against the canvas, is fine.)
    • Look at the canvas with the easel's views. Don't read pixel values with other programs.
    • Paint shapes and marks, not computed pictures: don't encode an image in masks, amounts or proportions.

    What to read

    notes/easel_guide.md; notes/studio_notes.md; notes/research/friedrich_materials.md (his materials and method, sourced); notes/research/trees.md (how trees are built) and notes/research/oil_paint_physics.md as needed.

    Working

    • You make every artistic decision.
    • Friedrich's pictures are full of small, particular details; don't stop at broad passages.
    • Look at your painting often, whole and close up.
    • Keep a working journal with bin/easel note "..." as you go: your own working notes. Add to it; don't rewrite earlier entries.
    • Develop the painting until you judge it complete. Then save it (bin/easel save) and close the session.

    When you're done

    Reply with the paths of the saved painting and its log, the painting's title if you give it one, and if you like a few sentences about the picture.

  5. GuideThe easel · 475 linesnotes/easel_guide.md
  6. Studio notesStudio notes · 187 linesnotes/studio_notes.md
  7. ResearchCaspar David Friedrich: materials and method · 237 linesnotes/research/friedrich_materials.md
  8. ResearchTrees: how they are built · 122 linesnotes/research/trees.md
  9. SummarySummary it continued from after its context was compacted · 82 lines

    Continuation summary

    Task (from BRIEF.md in [local path redacted]): Paint one original summer landscape in the manner of Caspar David Friedrich with the claude-paint easel (bin/easel), working only in the studio and the scratch folder. No reference images, image models or pictures of his work.

    Rules

    • Painting and looking only through the easel. Don't replay, copy or edit the log, open a second session, or read pixels with other programs (bin/easel check is fine).
    • Paint shapes and marks, not encoded images.
    • Keep a journal with bin/easel note "...", appending only.
    • Include many small, particular details, and look often, whole and close.
    • When the painting is complete: bin/easel save, then bin/easel close.
    • Final reply: paths of the saved painting (out/easel/painting/painting.png) and its log (paintings/lua/painting.lua), the title, and optionally a few sentences about the picture.

    Environment

    • Scratch: export TMPDIR=[local path redacted] TMP=$TMPDIR TEMP=$TMPDIR. Chunk files are written there ($TMPDIR/c_*.lua) and run with timeout 900 bin/easel do -f file.
    • Wrap commands in timeout.
    • Looking:
      • A crop may be at most 500 units per side (1200 px at 1:1).
      • The whole view goes up to --size 1600.

    Session state

    • The session is open, 48 chunks. Painting clock is about day 16, ~18:00.
    • Chunk 1 was only a tubes() print. Chunk 2 is the canvas: 710 mm, aspect 1.42 (W=1000, H≈704), linen {15,13}, seed 1822, a red-earth/ochre knife ground under a brushed lead-white/ochre/umber top.

    Title and concept: "Summer Evening on the Elbe Meadows".

    • Low horizon (~y441) with a sky after sunset: deep blue at the top, grading through pale to a lemon/peach glow at the horizon.
    • Thin violet cloud strata near the glow (y 290–355). A crescent moon at (835,172).
    • Pale mauve far hills, and violet-grey distant tree lines with a town (spire at x668, tower at x703) and poplars.
    • A meandering river:
      • riverA: near reach, right side, y 470–500;
      • riverB: far reach, x 360–700, y 457–470;
      • riverC: a glint at x 110–260, y 453.
    • A stag-headed oak (trunk at x≈300, base ~y595): dead leader to y110, dead side limbs, dark olive foliage clumps with lit tops.
    • A dark olive foreground bank below bankPts (crest ~y553–587).

    Persistent Lua globals

    • Geometry and masks: hillY, flatY, bankY, hillsM, landM, meadowM, bankM (old), bankM2 and bankPts (the current bank), riverA, riverB, riverC, riverAll, oakLimbs, oakM2 (trunk and limbs), branches (183 polylines; index 173+ are dead stubs), foliM, foliTops, treeZone, skyStip, cloudM, moonM, pathM and pathPts (the path is now hidden), farEdgeA/B/C, nearEdgeA/B, townM, flare2.
    • Helpers: spline(), limbMask(), grow(), gn.
    • Brush: rig (pointed round 5).
    • Piles:
      • sky: skyTop, skyMid, skyLow, skyGlow, skyGlowHot, skyDeep, skyGreenish, skyMid2, skyMid3, skyTopS, skyMidS;
      • land and distance: hillP, meadFar, meadMid, meadNear, meadLight, meadLight2, meadL, meadD, meadFarL, meadFarD, meadNearL, meadNearD, treeFar, townP;
      • bank: bankP, bankWarm, bankCool, bankOl, bankTop, bankMidP, bankLow, pathP, pathDark;
      • oak: barkDark, barkD, foliDark, foliDark2, foliLight, skyHoleHi, skyHoleLo;
      • sky details and river: cloudDusk, cloudLit, moonP, riverWarm, riverCool, reedP, reflP, bankShadow.

    Current problem (just seen after chunk 48)

    • The hatch pass on the meadow produced a cobblestone / crazy-paving texture.
    • It also left hard-edged dark "islands" wherever the noise split the light and dark piles. These are wrong and must be covered.
    • The paint is still wet. Options:
      • blend the meadow (mask: meadowM - bankM2 - riverAll - oakM2, excluding rects that make seams) to fuse the pass;
      • or let it dry and repaint with very fine, low-contrast horizontal touches that stay within one value.
    • Avoid noise-split piles with hard thresholds.

    Lessons learned

    • Rect-edged blends and bands leave seams.
    • Unclipped filbert strokes overrun the tree and river.
    • Stippled white "sky holes" in foliage read as blossom.
    • Blending wet paint rescues crude passes.
    • Wait for paint to be dry before overpainting details. Green earth/umber takes about 2–4 days.

    Outstanding tasks

    1. Fix the meadow texture: subtle, fine, horizontal; slightly lighter near the river.
    2. Trunk: fix the stepped silhouette at the base (~y565) and the pale ellipse around the base (cover with dark grass and weeds at the oak's foot). Possibly a thin warm rim on the trunk's glow side.
    3. Meadow details:
      • a row of pollard willows along a ditch leading from near the oak toward the river and town;
      • small summer hay cocks (y ~500–525);
      • possibly hedges.
    4. Barge with a tall mast and sail on riverA (~x850), plus its reflection; glints and ripple lines in the water.
    5. Two small figures seen from behind at x≈575–600 standing on the bank crest (feet ~y600, ~60–75 units tall), dark clothes, woman and man.
    6. Foreground bank:
      • grasses and tufts along the crest silhouetted against the meadow;
      • thistles, burdock and small stones in the foreground;
      • a path (optional), wildflower touches;
      • cover the light stroke remnants on the crest.
    7. Sky:
      • optional warm lit undersides on the strata;
      • evening star near the moon;
      • a few distant birds;
      • possibly a thin glaze to deepen the zenith.
    8. Refine the oak: some twigs over the foliage edges, and a few leaf sprays.
    9. Keep journal notes. Final review whole and close up; optional varnish{} once touch-dry.
    10. Save, close, and reply as the brief asks.

Notes

Painted at the easel, a passage at a time.

The video replays the painter’s strokes.

Shown in gallery light, lit from the upper left so the paint’s texture shows.

More after Friedrich

← → keys to browse · All paintings