What the painters were given

The easel

crates/easel/README.md · 509 lines · Guide

Given to 3 painters:

The easel

A live painting session for agents. The canvas stays alive in a background process; you send it Lua 5.5 chunks one shell command at a time, look at the result as a small JPEG and carry on. Every chunk that succeeds is appended to paintings/lua/<name>.lua. That file is the painting: easel run repaints it from scratch, byte for byte the same at the same width, or at 3200px for the full render.

The engine underneath is the claude-paint oil-paint simulator (see the repository README): every mark is made by simulated bristles carrying paint, and layers combine by Kubelka–Munk optics. The easel paints nothing on its own. You choose the motifs, colors, brushes and order.

Quick start

cargo build --release -p easel          # once; the binary is target/release/easel
E=target/release/easel

$E open dusk                            # start a session (1000px wide by default)
$E do 'canvas{style="friedrich", aspect=1.4, seed=7}'
$E do --look '
HZ = 470
sky = function(x, y) return gradient({{0,"#5d7396"},{0.6,"#9fabb8"},{1,"#e9d6a6"}}, y/HZ) end
work(above(function(x) return HZ + 15 end), {hand="broad", color=sky, angle=0, coverage=4.5})'
# prints: ok · chunk 2 · 5.98s · ... and the path of a JPEG: read it
$E look --mode value,squint             # judge the values
$E undo                                 # didn't like it
$E close                                # the session stays in paintings/lua/dusk.lua
$E run paintings/lua/dusk.lua --width 3200    # the full render → out/lua/dusk_3200.png

paintings/lua/example.lua is a whole small study made this way: an evening sky, a distant ridge, mist and a spruce on a knoll, in ten chunks. paintings/lua/rocks.lua models a boulder and a mountain range as solids and paints them from their light and shadow. paintings/lua/meadow.lua is a daylight landscape built on a world: a sky and clouds for its sun, hazed ranges, a beech in leaf casting its shadow and a meadow of grass tufts. Read all three before you start.

The loop

  1. Open. easel open <name> [--width 1000] [--undo 8] starts a background session, or reattaches if it's already running. If paintings/lua/<name>.lua exists, the session replays it first, so you can close, come back and go on painting. Other commands use the session you opened last (or -s <name>, or EASEL_SESSION).

  2. Paint a chunk. easel do '<lua>', easel do -f chunk.lua or easel do - (stdin). The reply is whatever the chunk printed, then ok · chunk N · seconds · clock · wet/dry. Add --look to also get a look in the same command.

  3. Look. easel look prints the path of a ≤1000px JPEG (100–250 KB):

    • --crop x0,y0,x1,y1 a window in canvas units, enlarged by whole pixels so you see the real grain;
    • --mode value (grayscale), squint (blurred: big shapes and values only), mirror (flipped: fresh eyes on the drawing); comma-separate to combine, e.g. --mode value,squint;
    • --dried (alias --wet): wet paint as it will look once it has leveled and dried; --relief also lights the brushwork from the upper left; --size N for the longest side.

    The plain look shows what is on the canvas now: the dry picture with wet paint on it as laid.

  4. Keep or undo. A chunk that fails changes nothing: the canvas, your variables (including anything it changed inside tables and closures from earlier chunks), the paint in your brushes and the clock go back to how they were before it, and it isn't logged. This holds at any --undo, including --undo 0. easel undo [n] takes back the last n successful chunks (up to --undo, 8 by default; each snapshot costs about 50 MB at 1000px).

  5. Step back. easel log prints the program so far. easel status gives a one-line summary. easel save [path] writes a PNG. easel check replays the log in a fresh session and confirms it matches the live canvas exactly.

  6. Time-lapse. easel frames on saves a JPEG after every chunk in out/easel/<name>/frames/.

How chunks behave

API reference

Canvas and palette

canvas{style="friedrich", aspect=1.4, seed=7}   -- the first chunk; returns H
-- styles: "friedrich" (after 1820), "friedrich_early". Sets W, H and pal.
canvas{style="friedrich", palette="friedrich_1820_greens", aspect=1.5, seed=11}
-- palettes: friedrich_1820, friedrich_early, and the same with _greens (adds
-- Prussian blue, green earth and, after 1820, Rinmann's green) for summer
palette("friedrich_early_greens")            -- any palette by name
pal:with{"copper green"}                     -- a rare tube for one passage
print(pal)                                   -- the tubes
pal:tubes()                                  -- list of tube names
local blues = pal:only{"lead white", "pale smalt", "cobalt blue"}
local c, recipe, err = pal:mix("#6f84a8")    -- nearest masstone the tubes reach
local c2 = pal:aim("#9fb0c0", sample(500, 200), 0.3, 1.0)  -- want, over, medium, coats
local p = pal:paint("#445566", 0.2)          -- a Paint (color, medium)
paint("#445566", {raw=true, hiding=0.5, stiff=0.3})        -- a paint not mixed from tubes

Colors and helpers

mix("#334455", "#887766", t, "light")        -- modes: "light" (OKLab, default), "pigment", "linear"
gradient({{0, "#5d7396"}, {0.6, "#9fabb8"}, {1, "#e9d6a6"}}, t)
rgb(120, 130, 140)   color("#aabbcc")
smoothstep(a, b, x)  lerp(a, b, t)  clamp(x, lo, hi)
n = noise{seed=3, octaves=5, period=260, persistence=0.5}
n(x, y)              -- about -1..1        n:at01(x, y)  -- 0..1
sample(x, y, r)      -- what's on the canvas there (wet paint included)
shift(c, dL, da, db) -- the same color moved in OKLab: shift(c, -0.06, 0, -0.02) is darker, bluer

Noise and irregularity

noise{kind="ridged", seed=3, period=120}        -- kinds: fbm (default), ridged (crests), billow (heaps)
noise{period=200, warp={80, 25}}                -- domain warp: {period, amount, twice?}: folds, wisps
noise{period=150, stretch={0.2, 4}}             -- stretched 4x along angle 0.2: wind, bedding
cells = worley{seed=2, period=30}               -- cells: stones, cracked mud, clumps
local f1, f2, edge, r = cells:at(x, y)          -- edge is 0 on a cell wall; r is 0..1 per cell
uneven(9, 120, 860, 0.6, 0.4, 5)                -- 9 positions from 120 to 860, spaced by hand:
                                                -- irregular gaps, clumped (posts, trees, boats)

A noise can be passed straight to coverage= or load_at= (as 0..1).

Masks

Masks are coverage maps of the whole canvas. Operations return new masks.

everywhere()
mask(function(x, y) return y < 300 and 1 or 0 end)    -- any function, 0..1
ellipse(cx, cy, rx, ry)   rect(x, y, w, h)
poly({{x, y}, ...})       poly(pts, true)              -- true: smoothed
below(function(x) return 420 + 20*math.sin(x/90) end)  -- under a curve (or a point list)
above(curve)                                           -- over it
ribbon(points, widths)    ribbon(points, 3)            -- a band along a line
m + n   m * n   m - n   -m                             -- union, intersect, subtract, invert
m:roughen(units, period, seed, edge)  -- push the edge in and out by about `units`
                                      -- (noise of `period` units), new edge `edge` units soft
m:soften(units)   m:blur(units)
m:grow(units)     m:shrink(units)   m:offset(units)
m:rim(width, soft)                -- the inside strip along the edge
m:distance()                      -- signed distance in units (+ inside): a field
m:band(lo, hi, soft)              -- turn a field back into a mask
m:times(fn or mask)  m:map(function(v) return v^2 end)
m:at(x, y)   m:area()

Points are {{x, y}, {x, y}, ...} or a flat {x1, y1, x2, y2, ...}.

The hand: brushes and strokes

b = brush("round", 3)        -- kinds: round, flat, filbert, fan, rigger, badger, stippler
b = brush{kind="filbert", width=8, stiffness=0.5}      -- also: length, hair, run, lay,
                                                       -- pickup, push, splay, ragged, bristles
b:load("#2a3040", 0.9)       -- mix it from pal (masstone) and dip: amount 0..1 of a full load
b:load("#9fb0c0", 0.6, {at={500, 300}, coats=0.8})     -- aim at the look over what's there
b:load(color, 0.8, {medium=0.4, pal=blues})
b:reload(color, amount)      -- wipe most of the old paint, then load
b:wipe(0.85)                 -- on the rag
b:fullness()                 -- paint left, 0..1
b:stroke({{100, 500}, {300, 520}, {500, 510}},
  {pressure={0.9, 0.3}, ramps={0.05, 0.4}, orient="across", shake=1, swell={1, 1.3, 0.8}, clip=m})
b:touch(x, y, {pressure=0.6, drag={1, 0}, twist=0.2, angle=0.3, clip=m})
b:mark_width(0.4)            -- round and rigger tips are pointed: width of a mark at this pressure
b:pressure_for(0.5)          -- the pressure for a 0.5-unit line
brush{kind="round", width=3, point=0.5}                -- a blunter point (1 = sharp, default)

A flick that ends in a hairline is a stroke whose pressure falls to 0: b:stroke({root, mid, tip}, {pressure={0.75, 0}, ramps={0.1, 0.75}}).

A brush keeps its paint across strokes and chunks: several strokes from one load run dry naturally. orient is "across", "along" or a fixed angle.

Covering areas

work(mask, {hand="body", color=..., angle=0, ...})

hand picks a preset from the style, which you then adjust: broad (long soft passes: skies, fog, water), body (form in body color, the default), detail (small, cut in), hatch (short strokes side by side: conifers, grass), glaze (thin veils; medium 0.6–0.95), scumble, blend (a clean blender fusing wet paint). Options:

option meaning
color a color, function(x, y) returning one, or a sky or clouds (color=s): the look you want on the canvas
color_over instead of color: relative to what's under each stroke. {shift={dL, da, db}} (e.g. a shadow: {shift={-0.06, 0, -0.012}}), or function(x, y, under) sampled every 2 units with under = the canvas there before the pass
hug true (default): strokes reach a mask's edges; false lets edges thin out
angle stroke direction, a number or function(x, y)
tool "filbert 8", {kind=, width=} or a brush
length {min, max} stroke length in units
coverage layers of strokes over each point (2–5)
medium oil medium in the paint, 0..1 (thin 0.25, body 0.15)
pal a palette (e.g. pal:only{...}), or false for unmixed paint
aim "laid" (default: aim at the look over what's there), "masstone", or a number of coats
pressure, ramps {start, end} pressure; attack and release fractions
dips {every, load, wipe}: strokes per trip to the palette
load, load_at load per dip; a field that varies it
angle_jitter, curve ({bow, wave}), cross, drift ({amount, scale}), tail, broken, swell, clump the hand's irregularity
order "passages", "scatter", "down", "across" or a sweep angle
orient, shake, clip, threshold, cut_in (a tool), scrub, blender, ruler, jitter, mix_jitter, paint ({hiding, stiff}), seed as in the engine's Handling
blend(mask, {angle=0})                    -- = work(mask, {hand="blend", ...})
stipple(mask, {width=2.4, color="#cfccc2", coverage=function(x, y) ... end,
  pressure={0.5, 0.9}, dips={16, 0.35, 0.7}, aim=false, medium=0.6,
  drag={1, 0}, twist=0.3, cluster={0.2, 5}, feather=0.6, clip=false,
  fade=1})                                -- fade: contrast falls where coverage thins; 0 for specks
                                          -- (stars, snowflakes); color_over works here too
glaze(mask_or_nil, {color="#8a6a3a", coats=0.4, pigment="transparent"})   -- or semi, opaque, varnish

Trees and foliage

t = tree{habit="beech", x=700, y=336, height=236, seed=5}
-- habits: oak, dead_oak, birch, spruce, beech, alder, willow; years= to grow older or younger
for _, l in ipairs(t.limbs) do
  -- l.pts {{x,y},...}, l.w (width per point), l.z, l.order (0 trunk, 1 limbs, ...),
  -- l.parent (index), l.at, l.dead, l.dead_from, l.broken, l.root
end
t.tips   t.bounds   t:mask()
leaves = t:foliage{sun={-0.6, -0.7, 0.35}, seed=5}   -- sun: toward it (x right, y down, z to you)
-- winter=true: bare; also years, clump, spacing, squash, droop, fill, ragged, bare, tip, spray
leaves:mask()   leaves:lit()   leaves:gaps(6)   leaves:envelope(6)   -- masks
leaves.clumps   -- back to front: {x, y, z, r, squash, tilt, fill, lit, shade, limb, mass}

The skeleton says how the tree grew, and the foliage where its leaves are and how the sun reaches them. Painting them is up to you. A worked example (from meadow.lua):

local trunk, limb, twig = brush("round", 3.5), brush("round", 1.4), brush("rigger", 0.6)
for i, l in ipairs(t.limbs) do
  local b = (l.order == 0) and trunk or ((l.w[1] > 0.9) and limb or twig)
  if i % 5 == 1 or b:fullness() < 0.3 then b:reload("#3e372f", 0.9) end
  b:stroke(l.pts, {pressure={0.85, 0.2}, ramps={0.03, 0.5}})
end
local turn = noise{seed=7, period=12}      -- leaf strokes turn every which way, not in rows
local way = function(x, y) return 2.2 * turn(x, y) end
work(leaves:mask(), {hand="hatch", tool="round 1.6", length={3, 7}, coverage=2.6, angle=way, color="#2c3a22"})
work(leaves:lit() * leaves:mask(), {hand="hatch", tool="round 1.3", length={2, 5}, coverage=2.2, angle=way, color="#6a843b"})

Meadows

tufts = sward{region=below(function(x) return HZ + 40 end), horizon=HZ, near=H, height=30,
  flowers=0.05, seed=4, wind={lean=0.15, gust=0.2, period=160, seed=2}}
-- also spacing, thin, smallest, blades={lo, hi}, fan, curl, kinds, patch, patch_size
-- tufts far first: {x, y, scale, height, lean, lush, blades={{foot, ctrl, tip}, ...}, flower={x, y, r, kind}}
local g = brush("rigger", 0.7)
for i, t in ipairs(tufts) do
  if i % 4 == 1 then g:reload(i % 8 == 1 and "#7a8f3c" or "#5e7a30", 0.7) end
  for _, bl in ipairs(t.blades) do
    g:stroke(bl, {pressure={clamp(0.25 + 0.5 * t.scale, 0.2, 0.9), 0}, ramps={0.05, 0.7}})
  end
end

Tufts shrink and thin toward the horizon and stop where they'd be smaller than smallest: paint the far meadow as tone underneath first.

Form: solids, light and shade

Model what you paint as solids, light them, then let their planes decide your colors, stroke directions and edges. Form paints nothing itself. Coordinates are canvas units, with z pointing toward you.

-- bodies: a mass, turned, weathered, broken by fracture planes; + and - combine
rock = body.ellipsoid({330, 560, 60}, {150, 105, 110})      -- center, radii
  :turn({330, 560, 60}, 0.3, 0.1, -0.12)                    -- yaw (right side toward you), pitch (top toward you), roll
  :rough(15, 150, 1)                                        -- amp, period, seed, ridged?
  :cut({330, 480, 60}, {-0.35, -1, 0.45}, 10, 4)            -- at, outward normal, facet id, round
  :rough(0.9, 25, 2, true)                                  -- pitted grain
slab = body.block({600, 600, 0}, {200, 40, 80}, 3)          -- center, size, round
-- a mountain face below a crest line (a function of x, or points)
range = ridge{crest=function(x) return 330 - 60*math.sin(x/170) end, depth=320, seed=7,
  lean={0.9, 0.7}, gullies={45, 0.5}, fan=1, base=560, z0=-600}   -- also strata={spacing, step, tilt}
-- any height field: z (toward you) or nil where there's no surface
dune = terrain{area={0, 500, 1000, 714}, height=function(x, y) return 20*math.sin(x/60) end}

-- the lit depth buffer: parts are numbered in order (1, 2, ...)
f = form{ {range, dist={2.0, 0}}, {rock, dist=0.3},          -- dist: number or {at, per_z} (aerial perspective)
  light={from={-1, -0.7}, front=0.5, ambient=0.2, penumbra=0.05} }  -- front < 0: contre-jour
  -- light also takes bounce, bounce_from={x,y,z}, reach, thickness, across_parts

f:sample(x, y)      -- nil off the form, else {part, facet, z, n, dist, fall, across, lit, shade={turn, direct, cast, bounce, sky, value}}
f:shade(x, y)  f:value(x, y)  f:lit_at(x, y, soft)  f:part(x, y)  f:dist(x, y, far)
f:fall(x, y)  f:across(x, y)  f:bend(x, y, span)  f:edge_angle(x, y, span)
aerial(dist, visibility)     -- how much of a color the air replaces, 0..1

-- masks
f:parts_mask{2}                                   -- where a part is in front
f:lit{parts={2}, soft=0.12}   f:shadow{parts={2}} -- the light and shadow families
f:silhouette{parts={1}, soft=0.6, haze={3, 4}}    -- edge soft + 3·aerial(dist, 4)² units wide
f:edges{turn=0.8, step=3, span=2.5, concave=true} -- plane breaks and overlaps (concave: only hollows)
f:mask(function(s) return s.shade.sky end)        -- any rule (serial, ~0.5 s at 1000px; s is reused)

-- stroke directions straight from the form (no grid): down the planes, around them, along breaks
work(f:silhouette{parts={2}} * f:shadow{parts={2}}, {hand="body", color=function(x, y)
  return mix("#3e3a36", "#8a8070", f:value(x, y)) end, angle=f:field("fall")})
f:field("across")   f:field("edge", 2.5)

Place solids in depth with z: a ridge's face leans toward you at its foot, so set its z0 back (e.g. z0=-600) or it will hide the rocks in front of it. A form costs 28 bytes per pixel (20 MB at 1000px, 190 MB at 3200px).

The world: camera, ground, sun, shadows, water

A world is one picture's space in meters: a camera (eye height, horizon, field of view), the ground, water, one sun and the bodies standing there. Build it once. w:place returns a new world (keep the result).

HZ = H * 0.46
w = world{horizon=HZ, eye=1.7, fov=50,                 -- horizon: canvas y at eye level
  sun={azimuth=-125, elevation=38},                    -- degrees: 0 ahead (contre-jour), -90 left,
                                                       -- 180 behind you; below 0: twilight
  ground=function(X, Z) return 1.2*math.sin(X/40) * math.min(1, Z/60) end,   -- meters, gentle
  water={level=-0.2, ripple={0.03, 1.4, 0.3, 7}}}      -- fills hollows below the level
-- also view={x, y, w, h} (a panel), visibility (m), backdrop (m)
local s = w:spot(700, 336)             -- the ground seen at a canvas point (or w:spot_at(X, Z))
print(s)                               -- spot(x, y, units per meter, at X, Y, Z m)
local tall = w:height(s.x, s.y, 18)    -- how tall 18 m looks standing there (units)
local rock = body.block(s:p(0, 0.4, 0), s:size(1.3, 1.0, 1.1), s:m(0.3))   -- meters -> units
w, stone = w:place(s, rock)            -- a body in the world (lit, shadowed, reflected)
w = w:proxy(s, body.ellipsoid(s:p(0, 11, 0), s:size(7, 6, 6)))   -- casts a shadow but isn't painted
                                       -- as a form: stand-in for a tree crown or a figure
v = w:view()                           -- trace once and keep it
v:sky()  v:land()  v:water()  v:shadows()  v:contact(0.25)  v:reflections()  v:bodies_mask{stone}
v:at(x, y)      -- {what="sky"|"ground"|"water"|"body", body, at={X, Y, Z}, n, dist, shade, lit}
v:mirror(x, y)  -- what calm water shows there: {body, src={x, y}, shade, fresnel, travel} or nil
v.form          -- the bodies as a form: v.form:lit{parts={v:part(stone)}}, v.form:field("fall"), ...
                -- (v.form.parts counts visible bodies only; v:part(proxy) is 0)
w:to_ground(x, y)  w:project(X, Y, Z)  w:scale_at(Z)  w:aerial(Z)  w:shadow_angle(x, y)  w:sun_canvas()
w:ribbon({{-2.6, 4.5}, {-1.6, 8.6}, {-0.4, 9.7}}, 1.1)   -- a path on the ground (width m) as a mask
w:recede({2, 6}, {0.3, 4}, 8)                             -- spots stepping away: posts, footprints

A shadow is the ground a little darker and bluer, stroked the way it falls:

work(v:shadows() * v:land(), {hand="body", tool="filbert 3", length={6, 16}, coverage=3,
  angle=w:shadow_angle(s.x, s.y + 2), color_over={shift={-0.06, -0.004, -0.012}}})

Sky, clouds, haze and distant ranges

sk = w:sky{haze=2.2, uneven={0.5, 30000, 5}}   -- the sky for this world's sun, as paint colors
-- also layer={alt, thick, density, uneven, seed}, overcast=0..1, exposure, balance (adapt to the sun's color)
cl = w:clouds{sky=sk, cell=3,                  -- meters; x right, z away, base/top altitude
  {kind="cumulus", x=-3000, z=9000, base=1300, width=3000, height=1500, seed=4},
  {kind="bank", x0=-2000, x1=30000, z=38000, depth=9000, base=700, top=2600, seed=4},
  {kind="stratus", base=3500, thick=500, cover=0.35, seed=2, wind={-0.2, 2}, breaks={14000, 0.2}}}
work(above(function(x) return HZ + 12 end), {hand="broad", color=cl, angle=0, coverage=4.5})
cl:mask{alpha={0.3, 0.8}, lit={0.4, 0.9}}      -- lit cloud edges; shade={..} for the bellies
sk:at(x, y)  sk:airlight(x)  cl:alpha(x, y)  cl:lit(x, y)

air = haze{visibility=18000, height=800, mist={140, 6, 90, 7}}   -- mist: {top m, density, uneven m, seed}
rs = w:ranges{near=6000, far=22000, count=2, seed=8, heights={180, 700}, kinds={"dome", "saddle"}}
for i = #rs, 1, -1 do                          -- far to near; kinds: peak, dome, plateau, saddle, cliff
  local l = rs[i]
  work(l:mask() * above(function(x) return HZ + 3 end), {hand="body", length={20, 60}, angle=0.05,
    color=function(x, y) return mix("#3f4c44", sk:airlight(x), 0.75 * l:haze(air, x, y)) end})
end
-- l:crest(x), l:z_at(x), l:ridge{depth=200, gully=260} (a solid for form{} to light)

A sky or clouds passed as color= is read on the engine's threads, so it costs nothing extra. Twilight is the same code with the sun below the horizon (elevation=-4): the sky turns to its afterglow, the Earth's shadow and the Belt of Venus, and the clouds catch the light from below.

A whole painting, in order

  1. canvas{}, then w = world{...} and sk = w:sky{...} (and clouds).
  2. The sky, thin, in long strokes, then blend; wait(24*60).
  3. The distance: ranges far to near, each hazed by l:haze; mist stippled over their feet.
  4. The ground as tone, colored by distance (w:to_ground, w:aerial).
  5. The motifs: bodies and proxies placed in the world, v = w:view(), then shadows and contact, trees (limbs, then foliage dark to light), rocks from v.form, meadows from sward.
  6. The small particulars last, with pointed brushes: twigs, blades, flowers, figures.
  7. wait(24*60); varnish(); relief() (and cracks{} for an old picture).

For winter, grow trees bare (t:foliage{winter=true} or no foliage), and paint snow as the ground's color with color_over for its blue shadows.

Time and finishing

wait(minutes)         -- time passes: the paint ages where it lies; returns the clock
dry()                 -- wait until every film is touch-dry; returns the clock
clock()               -- painting minutes since canvas{}
drying(x, y)          -- "open", "setting", "tacky" or "dry" there
varnish{color="#e6d3a4", coats=0.4, vary=0.12}
cracks{dirt=0.4, vary=1, veil=0.5}          -- craquelure, fitted to this canvas's ground;
                                             -- also island_mm, ground_um, width_um (default:
                                             -- from the ground), depth_um, cupping_um, corners
relief(strength, gloss)                      -- light the surface relief (style default)

wait runs the engine's drying model: each pixel's paint goes from open (workable, blends and lifts) through setting (stiff, barely blends) to tacky (set, grabs the brush) and touch-dry, at a pace set by its pigments, film thickness and oil. So a chunk can work wet into wet (no wait), come back to tacky paint (wait(180)) or paint over a dry layer (wait(24*60)). The clock is written into the log at every chunk, so time is part of the program.

Replay

easel run paintings/lua/<name>.lua [--width 3200] [--out path.png]
          [--crop x0,y0,x1,y1] [--margin 40] [--look]

This runs the chunks in order in a fresh session and writes out/lua/<name>_<width>.png; --look also writes a JPEG next to it. At the width you painted at, the PNG is byte-identical to easel save from the live session. At 3200px it is the full render: the same program at a finer grain. The file is plain Lua with chunk markers (--@ chunk N · clock M), so you can edit it by hand and replay. If you do, keep the markers.

Costs (1000px, busy 10-core machine)

Limits

Source